No abstract

No abstract

Firatligil-Durmuş E., Šárka E., Bubník Z. (2008): Image vision technology for the characterisation of shape and geometrical properties of two varieties of lentil grown in Turkey. Czech J. Food Sci., 26: 109-116.Geometrical features of lentil seeds (lens culinaris Medik) were analysed using the image analysis LUCIA system Ver. 3.52. The values of the weight of 1000 kernels, kernel density, specific volume, specific surface area, and surface area of 1000 kernels of red and green lentils were determined as 66.61 and 138.56 g, 1504.5 and 1376.4 kg/m 3 , 0.6647 and 0.7265 cm 3 /g, 0.594 and 0.579 m 2 /kg, 395.4 and 801.9 cm 2 , respectively. The lentil volume was simulated by an oblate spheroid and two sphere segments and the volumes obtained with both models were compared with that obtained by pycnometric method. Percentage differences of the two sphere segment approximation for red and green lentils were 4.4% and 4.2%, respectively. The height (thickness) of lentils was constant and practically the same with both varieties (2.6 mm) and therefore it was possible to simplify the geometrical models. Thus, 2D image analysis is suitable for a quick evaluation of the specific volume and surface area of grains on the basis of the projected area (equivalent diameter) without the measurement of the height. Image processing provides a simple, rapid, and non-invasive methodology to estimate lentil geometric features and engineering parameters.

No abstract

AbstractŠárka E., Kruliš Z., Kotek J., Růžek L., Korbářová A., Bubník Z., Růžková M. (2011): Application of wheat B-starch in biodegradable plastic materials. Czech J. Food Sci., 29: 232-242.Food application of wheat B-starch comprising small starch granules as a result of lower quality is problematic. Accordingly, B-starch or acetylated starch prepared from it, with the degree of substitution (DS) of 1.5-2.3, was used in biodegradable films after blending with poly-(ε-caprolactone) (PCL). The following mechanical characteristics of the produced films were derived from the stress-strain curves: Young modulus, yield stress, stress-at-break, and strainat-break. Water absorption of PCL/starch (60/40) films was determined according to European standard ISO 62. The measured data were compared with those of commercial A-starch. The films containing native starch degraded in compost totally during 2 months. Acetylation of starch molecules in the composites reduced the degradation rate. Optical microscopy, in combination with the image analysis system NIS-Elements vs. 2.10 completed with an Extended Depth of Focus (EDF) module, was used to study the surface morphology of PCL/starch films after 20-day and 42-day compost incubation. Chemical changes in the compost used for the film exposition were measured.