Stall recovery process for performance enhancement of an axial compressor has been experimentally carried out using air injection at its rotor blade row tip region. Twelve air injectors had been mounted evenly spaced around the compressor casing upstream the rotor blade row. Instantaneous flow velocities at various radial and circumferential positions were measured simultaneously utilizing hot wire anemometry. These unsteady results, separately presented in frequency and time domains, provided to distinguish stall inception process and consequent flow induced fluctuations. Time-dependent responses of the flow field properties within the compressor passage and progressive alleviation of stall cells are demonstrated during the tip injection process. Blade tip air injection worked effectively and enhanced the compressor stall margin about 9%. This attractive result occurred for the case where the total mass flow rate passing through the air injectors was as small as 0.8% of the compressor main flow rate. In addition, this augmentation in the stall margin was accompanied by increase in the compressor delivery total pressure. Air injection at the blade row tip region caused its beneficial effects to extend throughout the blade whole span, especially while working at the near-stall conditions.