The (1−x)(K0.5Na0.5)NbO3–x(Ba0.5Sr0.5)TiO3 (KNN-BST) solid solution has been synthesized by conventional solid-state sintering in order to search for the new lead-free relaxor ferroelectrics for high temperature applications. The phase structure, dielectric properties, and relaxor behavior of the (1−x)KNN-xBST solid solution are systematically investigated. The phase structure of the (1−x)KNN-xBST solid solution gradually changes from pure perovskite phase with an orthorhombic symmetry to the tetragonal symmetry, then to the pseudocubic phase, and to the cubic phase with increasing addition of BST. The 0.90KNN-0.10BST solid solution shows a broad dielectric peak with permittivity maximum near 2500 and low dielectric loss (<4%) in the temperature range of 100–250 °C. The result indicates that this material may have great potential for a variety of high temperature applications. The diffuse phase transition and the temperature of the maximum dielectric permittivity shifting toward higher temperature with increasing frequency, which are two typical characteristics for relaxor ferroelectrics, are observed in the (1−x)KNN-xBST solid solution. The dielectric relaxor behavior obeys a modified Curie–Weiss law and a Vogel–Fulcher relationship. The relaxor nature is attributed to the appearance of polar nanoregions owing to the formation of randon fields including local electric fields and elastic fields. These results confirm that the KNN-based relaxor ferroelectrics can be regarded as an alternative direction for the development of high temperature lead-free relaxor ferroelectrics.

No abstract

No abstract

In order to develop high temperature lead-free relaxors, xBiScO3−(1−x)(K0.5Na0.5)NbO3[xBS−(1−x)KNN] ceramics were proposed using a tolerance factor approach. To verify this proposal, xBS−(1−x)KNN ceramics were synthesized by conventional solid-state sintering. A stable perovskite phase was obtained when KNN content was greater than 96 mol %. The diffuse phase transition and frequency dispersion of the dielectric constant, which are two typical characteristics of relaxor ferroelectrics, were observed in xBS−(1−x)KNN ceramics. The dielectric relaxor behavior follows a modified Curie–Weiss law relationship. In addition, 0.04BS-0.96KNN ceramics show a broad and stable permittivity maximum near 2500 from 100 to 300 °C and lower dielectric loss (<5%) at broad temperature usage range (100–300 °C). The results indicate that this material may have great potential for high temperature capacitors in automobile applications.

No abstract