Background and Objective: This study aims to improve the capacity and level of service at the sixth circle in Jordan by using traffic signals and a roundabout metering approach. Methods: VISSIM software and C++ program were used to improve the capacity and level of service. The site area (Sixth circle) was located near Crown Plaza and the Jordan Gate Towers project, which causes congestion due to heavy traffic flow. Therefore, this paper assesses the traffic in the sixth circle and presents the possible solutions to reduce the daily traffic flow for the users of this circle. Results: Four signals were placed at the roundabout in the second scenario, which was connected to each other with different cycle lengths. 90-second cycle length gives D value of the level of service. The third scenario was placed adaptive signals on the roundabout, which connects traffic signals with ground detectors placed at a certain distance before the signal and based on the queue length of the flow cars that pass the detector. Conclusion: The adaptive signals worked on the opening and closing and were designed according to the language simulation and the adoption of the language C++. The first two signals were opened considering the Swefieh road with the reference of King Faisal for a period of 45 seconds. It was then closed for 45 seconds to open the signal from the next street from the fifth circle with Zahran street.

No abstract

Due to the chronic shortage of energy-related analytical data and disintegration of building energy regulations, numerous existing residential buildings in Petra (Jordan) and many cities worldwide suffer from poor building energy design. This paper aims at investigating the potential of applying energy-saving standards in order to improve the whole-building energy consumption of low-rise residential buildings in mild and dry climate zones. Representative buildings were selected based on a field survey. Proposed strategies focused on applicable solutions such as envelope components, and energy-related systems were set. The models were created using Autodesk Revit, and then the results were generated by the EnergyPlus engine. The findings showed that the application of building energy standards greatly impacts the overall energy end-use, where up to 30% reduction can be achieved by applying the Jordanian code, and up to 45% by applying the American standard. This work provides guidance for the residential building industry and policymakers in Jordan and many other countries with similar building characteristics and climate zones.

No abstract

No abstract