Link to publication on Research at Birmingham portal General rights Unless a licence is specified above, all rights (including copyright and moral rights) in this document are retained by the authors and/or the copyright holders. The express permission of the copyright holder must be obtained for any use of this material other than for purposes permitted by law. • Users may freely distribute the URL that is used to identify this publication. • Users may download and/or print one copy of the publication from the University of Birmingham research portal for the purpose of private study or non-commercial research. • User may use extracts from the document in line with the concept of 'fair dealing' under the Copyright, Designs and Patents Act 1988 (?) • Users may not further distribute the material nor use it for the purposes of commercial gain. Where a licence is displayed above, please note the terms and conditions of the licence govern your use of this document. When citing, please reference the published version. Take down policy While the University of Birmingham exercises care and attention in making items available there are rare occasions when an item has been uploaded in error or has been deemed to be commercially or otherwise sensitive.

Supercritical water oxidation (SCWO) is an advanced process mainly employed for the treatment of hazardous stable wastes, otherwise treatable by incineration. It is based on the unique properties of water above its critical point (T(c)=675 K, P(c)=22.2 MPa), making it a superior reaction medium for the destruction of all organics in the presence of oxygen. This work presents preliminary laboratory scale studies on SCWO of nitrogen (N)-containing hazardous hydrocarbons, with a view to enhancing the process performance, using available reagents and non-complex reactor design. This article investigates the destruction of dimethylformamide (DMF), carried out in a continuous (plug flow) reactor system. SCWO of DMF was enhanced by (i) a split-oxidant system, where stoichiometric oxidant was divided between two inlet ports at various ratios and (ii) the addition of isopropyl alcohol (IPA) as a co-fuel, premixed with the feedstock. Testing a range of temperatures, initial DMF concentrations, oxidant ratios, IPA ratios and oxidant split ratios, selected results were presented in terms of % total organic carbon and % N removal. Reaction kinetics were studied and showed a dramatic decrease in the activation energy upon adding IPA. Split-oxidant-feeding enhancement depended on the split ratio and secondary feed position.