Perovskite solar cells (PSCs) have reached certified efficiencies of up to 23.7% but suffered from frailness and instability when exposed to ambient atmosphere. Zinc oxide (ZnO), when used as electron transport layer (ETL) on PSCs, gives rise to excellent electronic, optic, and photonic properties, yet the Lewis basic nature of ZnO surface leads to deprotonation of the perovskite layer, resulting in serious degradation of PSCs using ZnO as ETL. Here, we report a simple but effective strategy to convert ZnO surface into ZnS at the ZnO/perovskite interface by sulfidation. The sulfide on ZnO–ZnS surface binds strongly with Pb2+ and creates a novel pathway of electron transport to accelerate electron transfer and reduce interfacial charge recombination, yielding a champion efficiency of 20.7% with improved stability and no appreciable hysteresis. The model devices modified with sulfide maintained 88% of their initial performance for 1000 h under storage condition and 87% for 500 h under UV radiation. ZnS is demonstrated to act as both a cascade ETL and a passivating layer for enhancing the performance of PSCs.

Crown ether effectively stabilizes the cubic phase of CsPbI3 to inhibit the moisture invasion and phase transformation of CsPbI3 films, producing large-area devices and improving device performance.

Perovskite solar cells (PSCs) with organic hole transporting layers (o-HTLs) have been widely studied due to their convenient solution processing, but it remains a big challenge to improve the hole mobilities of commercially available organic hole transporting materials without ion doping while maintaining the stability of PSCs. In this work, we demonstrated that the introduction of perovskite quantum dots (QDs) as interlayers between perovskite layers and dopant-free o-HTLs (P3HT, PTAA, Spiro-OMeTAD) resulted in a significantly enhanced performance of PSCs. The universal role of QDs in improving the efficiency and stability of PSCs was validated, exceeding that of lithium doping. After a deep examination of the mechanism, QD interlayers provided the multifunctional roles as follows: (1) passivating the perovskite surface to reduce the overall amount of trap states; (2) promoting hole extraction from perovskite to dopant-free o-HTLs by forming cascade energy levels; (3) improving hole mobilities of dopant-free o-HTLs by regulating their polymer/molecule orientation. What is more, the thermal/moisture/light stabilities of dopant-free o-HTLs-based PSCs were greatly improved with QD interlayers. Finally, we demonstrated the reliability of the QD interlayers by fabricating large-area solar modules with dopant-free o-HTLs, showing great potential in commercial usage.