No abstract

Cu-Ag complex inks are developed for printing conductive tracks of low cost, high stability, and high conductivity on heat-sensitive substrates such as polyethylene terephthalate (PET) substrates. The inks show an obvious self-catalyzed characteristic due to the in situ formation of fresh metal nanoparticles which promote rapid decomposition and sintering of the inks at a low temperature below 100 °C. The temperature is 40-60 °C lower than those of general Cu complex inks and 100-120 °C lower than those of general Cu/Ag particle inks. Highly conductive Cu-Ag tracks of 2.80 × 10 Ω cm and 6.40 × 10 Ω cm have been easily realized at 100 °C and 80 °C, respectively. In addition, the printed Cu-based tracks not only show high oxidation resistance at high temperatures of up to 140 °C (the maximum tolerable temperature of current PET substrate) but also show excellent stability at high humidity of 85% because of the very uniform Cu-Ag hybrid structure. The printable tracks exhibit great potential application in various wearable devices fabricated on textiles, papers, and other heat-sensitive substrates.

The NiO nanocrystalline/reduced graphene oxide (rGO) composite film was successfully synthesized using a simple hot-injection and dip coating method. The as-prepared samples were characterized using X-ray diffraction (XRD), Raman, scanning electron microscope (SEM), ultraviolet and visible spectrophotometer (UV). Compared to the NiO film, the NiO nanocrystalline/rGO composite film exhibits enhanced electrochromic properties and large [Formula: see text] (40.7% at 550[Formula: see text]nm), fast switching speed ([Formula: see text].3[Formula: see text]s and [Formula: see text].9[Formula: see text]s), high coloration efficiency (12.85[Formula: see text]cm2 C[Formula: see text] and better cycling performance (1000 cycles). The improvement of the electrochromic properties was attributed to the large specific surface area and good conductivity of the rGO.

No abstract