The electrical permittivity of the weaves obtained from natural cellulosic yarns or mixed with synthetic fibers was established with capacitor method. The highest value of relative electrical permittivity in case of the woven fabric from natural cellulosic fibers has been observed at the weave made of pure hemp (13.55) and the lowest at the weave obtained from the pure jute-weave packing (1.87). Electrical permittivity value of the pure jute weave packing is comparable to that of the permittivity for the glass thread, when the work conditions are as follows: temperature 25 ∘ C and air humidity 35%. The relative electrical permittivity of the weave is depending on the degree of crimping yarns especially in the weft direction, technological density in direction of the warp and weft, and surface mass of the weave.

No abstract

No abstract

No abstract

This paper study methods to obtain composite materials based on recycled rubber from End-of-Life tires and scrap textile. Rubber particles was obtained by industrial shredding procedures and separated by dimension, using sieves. Recycled cotton weave was obtained from scrap cotton textiles. The composite material was produced mixing the recycled rubber powder with a solution of acrylate rubber (AR), (NipolR AR 51) in acetone/ethyl acetate, then coating that composition on a 100% recycled cotton weave. After application, the composite was dried in a dryer with ventilation. The final composite material will be chemical characterized. Attempts will be made to determine whether the composite can be used as isolation material with temperature dissipation characteristics.