Wood cellulose nanofibers (CNFs) based on bleached pulp are different from the cellulose microfibrils in the plant cell wall in terms of larger diameter, lower cellulose molar mass, and modified cellulose topochemistry. Also, CNF isolation often requires high-energy mechanical disintegration. Here, a new type of CNFs is reported based on a mild peracetic acid delignification process for spruce and aspen fibers, followed by low-energy mechanical disintegration. Resulting CNFs are characterized with respect to geometry (AFM, TEM), molar mass (SEC), and polysaccharide composition. Cellulose nanopaper films are prepared by filtration and characterized by UV-vis spectrometry for optical transparency and uniaxial tensile tests. These CNFs are unique in terms of high molar mass and cellulose-hemicellulose core-shell structure. Furthermore, the corresponding nanopaper structures exhibit exceptionally high optical transparency and the highest mechanical properties reported for comparable CNF nanopaper structures.

Wood pulp fibers can serve as useful reinforcement of plastics for increased stiffness. To assess the potential of various wood fibers as reinforcement, a method has been developed to determine the contribution of the fibers to the elastic properties of the composite. A micromechanical composite model and classical laminate mechanics are used to relate the elastic properties of the fibers to the elastic properties of the composite. A large variety of composites made of various wood pulp fibers in an epoxy vinyl ester matrix was manufactured. From the tensile test results of the composites, the contributing Young’s moduli of the fibers in the longitudinal direction are back-calculated and summarized. One finding is that there is an optimum in fiber stiffness as a function of lignin content. It is also found that industrially pulped hardwood fibers have higher stiffness than the corresponding softwood fibers. One example is kraft-cooked Norway spruce fiber, for which a Young’s modulus of 40 GPa is found. The effects of hornification, prehydrolysis, and sulfite processing are also investigated. The results indicate that mild defibration process should be used, that does not damage the cell wall structure so that the inherent high stiffness of the native fibers can be retained. It can be concluded that the proposed method works well to rank the wood fiber candidates in terms of their contribution to the composite stiffness.

To expand the use of renewable materials, paper products with superior mechanical and optical properties are needed. Although beating, bleaching, and additives are known to improve industrially produced Kraft pulp papers, properties are limited by the quality of the fibers. While the use of nanocellulose has been shown to significantly increase paper properties, the current cost associated with their production has limited their industrial relevance. Here, using a simple mild peracetic acid (PAA) delignification process on spruce, we produce hemicellulose-rich holocellulose fibers (28.8 wt %) with high intrinsic strength (1200 MPa for fibers with microfibrillar angle smaller than 10°). We show that PAA treatment causes less cellulose/hemicellulose degradation and better preserves cellulose nanostructure in comparison to conventional Kraft pulping. High-density holocellulose papers with superior mechanical properties (Young's modulus of 18 GPa and ultimate strength of 195 MPa) are manufactured using a water-based hot-pressing process, without the use of beating or additives. We propose that the preserved hemicelluloses act as "glue" in the interfiber region, improving both mechanical and optical properties of papers. Holocellulose fibers may be affordable and applicable candidates for making special paper/composites where high mechanical performance and/or optical transmittance are of interest.

Certain xylanases from family GH10 are highly expressed during secondary wall deposition, but their function is unknown. We carried out functional analyses of the secondary-wall specific PtxtXyn10A in hybrid aspen (Populus tremula × tremuloides). PtxtXyn10A function was analysed by expression studies, overexpression in Arabidopsis protoplasts and by downregulation in aspen. PtxtXyn10A overexpression in Arabidopsis protoplasts resulted in increased xylan endotransglycosylation rather than hydrolysis. In aspen, the enzyme was found to be proteolytically processed to a 68 kDa peptide and residing in cell walls. Its downregulation resulted in a corresponding decrease in xylan endotransglycosylase activity and no change in xylanase activity. This did not alter xylan molecular weight or its branching pattern but affected the cellulose-microfibril angle in wood fibres, increased primary growth (stem elongation, leaf formation and enlargement) and reduced the tendency to form tension wood. Transcriptomes of transgenic plants showed downregulation of tension wood related genes and changes in stress-responsive genes. The data indicate that PtxtXyn10A acts as a xylan endotransglycosylase and its main function is to release tensional stresses arising during secondary wall deposition. Furthermore, they suggest that regulation of stresses in secondary walls plays a vital role in plant development.