No abstract

No abstract

Public reporting burden for the collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to a penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

The influence of anodic and cathodic prepolarization of electrodes, containing respectively 0.03, 0.48, and 1.3 percent carbon, in de-aerated N and 0.1 N sulfuric acid at 25 C (77 F) on the subsequent open circuit potential-time curves has been determined. Anodic pretreatment always lowers and cathodic pretreatment raises the initial potential on these curves. Magnitude of the potential shift and time required to resume the rest potential are larger the higher the prepolarizing time. The influence of carbon content and acid concentration is complex. Special experiments have indicated the importance of specimen, and especially solution history, and have permitted an interpretation in terms of polarization diagrams. The most likely explanation is the influence of sulfide or noble metal or metalloid ions derived from the alloy or possibly the solution in altering the number of active anodic sites. This is achieved by an increase in the degree of hydrogen poisoning or by accumulation or plating out of metals or metalloids.