BackgroundA fundamental pre-requisite for the clinical success in dental implant surgery is the fast and stable implant osseointegration. The press-fit phenomenon occurring at implant insertion induces biomechanical effects in the bone tissues, which ensure implant primary stability. In the field of dental surgery, the understanding of the key factors governing the osseointegration process still remains of utmost importance. A thorough analysis of the biomechanics of dental implantology requires a detailed knowledge of bone mechanical properties as well as an accurate definition of the jaw bone geometry.MethodsIn this work, a CT image-based approach, combined with the Finite Element Method (FEM), has been used to investigate the effect of the drill size on the biomechanics of the dental implant technique. A very accurate model of the human mandible bone segment has been created by processing high resolution micro-CT image data. The press-fit phenomenon has been simulated by FE analyses for different common drill diameters (DA = 2.8 mm, DB = 3.3 mm, and DC = 3.8 mm) with depth L = 12 mm. A virtual implant model has been assumed with a cylindrical geometry having height L = 11 mm and diameter D = 4 mm.ResultsThe maximum stresses calculated for drill diameters DA, DB and DC have been 12.31 GPa, 7.74 GPa and 4.52 GPa, respectively. High strain values have been measured in the cortical area for the models of diameters DA and DB, while a uniform distribution has been observed for the model of diameter DC . The maximum logarithmic strains, calculated in nonlinear analyses, have been ϵ = 2.46, 0.51 and 0.49 for the three models, respectively.ConclusionsThis study introduces a very powerful, accurate and non-destructive methodology for investigating the effect of the drill size on the biomechanics of the dental implant technique.Further studies could aim at understanding how different drill shapes can determine the optimal press-fit condition with an equally distributed preload on both the cortical and trabecular structure around the implant.
BackgroundA precise placement of dental implants is a crucial step to optimize both prosthetic aspects and functional constraints. In this context, the use of virtual guiding systems has been recognized as a fundamental tool to control the ideal implant position. In particular, complex periodontal surgeries can be performed using preoperative planning based on CT data. The critical point of the procedure relies on the lack of accuracy in transferring CT planning information to surgical field through custom-made stereo-lithographic surgical guides.MethodsIn this work, a novel methodology is proposed for monitoring loss of accuracy in transferring CT dental information into periodontal surgical field. The methodology is based on integrating 3D data of anatomical (impression and cast) and preoperative (radiographic template) models, obtained by both CT and optical scanning processes.ResultsA clinical case, relative to a fully edentulous jaw patient, has been used as test case to assess the accuracy of the various steps concurring in manufacturing surgical guides. In particular, a surgical guide has been designed to place implants in the bone structure of the patient. The analysis of the results has allowed the clinician to monitor all the errors, which have been occurring step by step manufacturing the physical templates.ConclusionsThe use of an optical scanner, which has a higher resolution and accuracy than CT scanning, has demonstrated to be a valid support to control the precision of the various physical models adopted and to point out possible error sources. A case study regarding a fully edentulous patient has confirmed the feasibility of the proposed methodology.
BackgroundIn some clinical cases, bruxism may be correlated to central nervous system hyperexcitability, suggesting that bruxism may represent a subclinical form of dystonia. To examine this hypothesis, we performed an electrophysiological evaluation of the excitability of the trigeminal nervous system in a patient affected by pineal cavernoma with pain symptoms in the orofacial region and pronounced bruxism.MethodsElectrophysiological studies included bilateral electrical transcranial stimulation of the trigeminal roots, analysis of the jaw jerk reflex, recovery cycle of masseter inhibitory reflex, and a magnetic resonance imaging study of the brain.ResultsThe neuromuscular responses of the left- and right-side bilateral trigeminal motor potentials showed a high degree of symmetry in latency (1.92 ms and 1.96 ms, respectively) and amplitude (11 mV and 11.4 mV, respectively), whereas the jaw jerk reflex amplitude of the right and left masseters was 5.1 mV and 8.9 mV, respectively. The test stimulus for the recovery cycle of masseter inhibitory reflex evoked both silent periods at an interstimulus interval of 150 ms. The duration of the second silent period evoked by the test stimulus was 61 ms and 54 ms on the right and left masseters, respectively, which was greater than that evoked by the conditioning stimulus (39 ms and 35 ms, respectively).ConclusionsWe found evidence of activation and peripheral sensitization of the nociceptive fibers, the primary and secondary nociceptive neurons in the central nervous system, and the endogenous pain control systems (including both the inhibitory and facilitatory processes), in the tested subject. These data suggest that bruxism and central orofacial pain can coexist, but are two independent symptoms, which may explain why numerous experimental and clinical studies fail to reach unequivocal conclusions.
BackgroundPain due to temporomandibular disorders (TMDs) often has the same clinical symptoms and signs as other types of orofacial pain (OP). The possible presence of serious neurological and/or systemic organic pathologies makes differential diagnosis difficult, especially in early disease stages. In the present study, we performed a qualitative and quantitative electrophysiological evaluation of the neuromuscular responses of the trigeminal nervous system. Using the jaw jerk reflex (JJ) and the motor evoked potentials of the trigeminal roots (bR-MEPs) tests, we investigated the functional and organic responses of healthy subjects (control group) and patients with TMD symptoms (TMD group).MethodThirty-three patients with temporomandibular disorder (TMD) symptoms and 36 control subjects underwent two electromyographic (EMG) tests: the jaw jerk reflex test and the motor evoked potentials of the trigeminal roots test using bilateral electrical transcranial stimulation. The mean, standard deviation, median, minimum, and maximum values were computed for the EMG absolute values. The ratio between the EMG values obtained on each side was always computed with the reference side as the numerator. For the TMD group, this side was identified as the painful side (pain side), while for the control group this was taken as the non-preferred masticatory side (non-preferred side). The 5th, 10th, 25th, 50th, 75th, 90th, and 95th percentiles were also calculated.ResultsAnalysis of the ratios (expressed as percentages) between the values obtained on both sides revealed a high degree of symmetry in the bR-MEPs % in the control (0.93 ± 0.12%) and TMD (0.91 ± 0.22%) groups. This symmetry indicated organic integrity of the trigeminal root motor fibers and correct electrode arrangement.A degree of asymmetry of the jaw jerk's amplitude between sides (ipJJ%), when the mandible was kept in the intercuspal position, was found in the TMD group (0.24% ± 0.14%) with a statistically significant difference in relation to the control group (0.61% ± 0.2%). This asymmetry seemed to be primarily due to a failure to facilitate the reflex on the painful side in intercuspal position.ConclusionsIn this 2 × 2 matrix diagnostic model, three different types of headache may be identified: 1) those due to organic pathologies directly and indirectly involving the trigeminal nervous system denoted as "Organic Damage"; 2) those in TMD patients; 3) other types of orofacial pain in subjects who could erroneously be considered healthy, denoted as Orofacial Pain "OP". This category of patient should be considered at risk, as organic neurological pathologies could be present and yet not directly affect the trigeminal system, at least in the early stages of the disease.
Convergence of various afferent inputs onto brainstem neurones may play an important role in the regulation of trigeminal motor activity. In particular, previous studies suggest that, besides sensory inputs arising from the orofacial region, extratrigeminal information may modulate jaw muscle function. In the present study the actions exerted on masseter and digastric muscles by the activation of somatosensory afferents coming from fore- and hind limbs were examined. The electromyographic activity (EMG) of masseter and digastric muscles was recorded in 20 anaesthetised rats, and EMG responses to single and paired electrical stimulation of common radial and sciatic nerves, at a threshold intensity for the activation of group II afferent fibres, were studied. The stimulation induced an excitatory response in both masseter and digastric muscles bilaterally. Ipsiand contralateral radial nerve stimulation evoked masseter responses at latencies of 13.8 +/- 2.4 ms and of 18.0 +/- 2.6 ms, respectively, and digastric responses 1.6 +/- 0.4 ms later. Ipsi- and contralateral sciatic nerve stimulation elicited masseter responses at latencies of 21.4 +/- 2.6 ms and of 23.3 +/- 2.0 ms, respectively, and digastric responses 2.0 +/- 0.2 ms later. The same masseter and digastric motor units were excited by both radial and sciatic nerve stimulation; this suggests a convergence of somatosensory inputs arising from fore- and hind limbs on the same pool of masseter and digastric motoneurones. Paired stimulation of the two nerves did not induce any summation of the responses; this finding suggests that the two inputs, reaching a common relay station, could give rise either to occlusion or to inhibitory interactions. Spinotrigeminal relationship evidenced in this study may be involved in the coordination of jaw and limb movements.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.