Calibrated microwave power and phase measurements are presented for the first recirculating planar magnetron prototype consisting of two coupled six-cavity 1-GHz planar cavity arrays. The results are presented for a solid cathode and two mode-control cathodes (MCCs) with aluminum or velvet electron emitters. The measurements were conducted using a prototype coaxial microwave power extraction scheme. The experimental operating parameters included: pulsed cathode voltages between −250 and −300 kV, voltage pulselengths of 200-600 µs, axial magnetic fields of 0.1-0.32 T, and entrance currents of 1-10 kA. The results showed improved oscillator frequency locking for the MCCs and increases in power and efficiency using the velvet electron emitter. Index Terms-Cavity magnetron, frequency locking, high-power microwaves (HPMs), recirculating planar magnetron (RPM), vacuum electronics.

Preliminary experiments of the recirculating planar magnetron microwave source have demonstrated that the device oscillates but is susceptible to intense mode competition due, in part, to poor coupling of RF fields between the two planar oscillators. A novel method of improving the cross-oscillator coupling has been simulated in the periodically slotted mode control cathode (MCC). The MCC, as opposed to a solid conductor, is designed to electromagnetically couple both planar oscillators by allowing for the propagation of RF fields and electrons through resonantly tuned gaps in the cathode. Using the MCC, a 12-cavity anode block with a simulated 1 GHz and 0.26 c phase velocity (where c is the speed of light) was able to achieve in-phase oscillations between the two sides of the device in as little as 30 ns. An analytic study of the modified resonant structure predicts the MCC's ability to direct the RF fields to provide tunable mode separation in the recirculating planar magnetron. The selfconsistent solution is presented for both the degenerate even (in phase) and odd (180 out of phase) modes that exist due to the twofold symmetry of the planar magnetrons. V

The Brillouin flow is the prevalent flow in crossed-field devices. We systematically study its stability in the conventional, planar, and inverted magnetron geometry. To investigate the intrinsic negative mass effect in Brillouin flow, we consider electrostatic modes in a nonrelativistic, smooth bore magnetron. We found that the Brillouin flow in the inverted magnetron is more unstable than that in a planar magnetron, which in turn is more unstable than that in the conventional magnetron. Thus, oscillations in the inverted magnetron may startup faster than the conventional magnetron. This result is consistent with simulations, and with the negative mass property in the inverted magnetron configuration. Inclusion of relativistic effects and electromagnetic effects does not qualitatively change these conclusions.