Biocidal products are substances or mixtures of several substances, used to combat harmful organisms for human or animal health. Substances with antibacterial effects include quaternary ammonium salts, such as benzalkonium chloride (BAC), didecyl chloride (DDAC), etc. Benzalkonium chloride (BAC) is a compound of the class of quaternary ammonium compounds (QAC) used as a cationic surfactant in personal hygiene, cosmetic and skin disinfection products [1]. BAC is a mixture of alkylbenzyldimethylammonium chlorides [C6H5CH2N(CH3)2RCl], in which R = C12, C14, C16, C18 are the main compounds, and the antibacterial effects being given by the alkyl chain length and the quaternary ammonium groups [1,2].In this study we compare two methods of analysis for quantitative determination: chemical titration [3] and liquid chromatography (HPLC-UV) [4]. Chemical titration is an iodometric method in a strongly acidic medium, in which the 0.05M potassium iodate solution is used as titrant (titration with extracted end point) [3]. HPLC determinations were performed using an Agilent 1100 Series HPLC, equipped with a binary pump, a degasser, an autosampler and a spectrophotometric detector in UV-Vis, and Agilent Chemstation software was used for data acquisition and analysis. Chromatographic parameters were injection volume, 10 μL; analysis time, 25 min; a Zorbax Eclipse XDB-C18 column (5 μm, 4.6 mm × 150 mm); and flow rate, 1.5 mL/min, isocratic conditions 20:80 A:B (v/v), where A = 0.4 M/L NaCl solution and B = methanol [4]. BAC monitoring was performed at a wavelength of 210 nm with the help of a UV-Vis spectrophotometric detector. The identification was performed by comparing the retention time of the analyzed compound with the retention time of the standard solution. Confirmation of the presence of BAC alkylic homologues, prior to quantitative determination, was performed using the mass spectrometry detection technique with a time-of-flight detector (TOF LC/MS).As a measure of selectivity, for calculating the degree of recovery, the standard method of addition was applied. As a measure of selectivity, the degree of recovery determined by the standard addition method was used. For the titrimetric method we studied the influence of the presence of possible interferences different from those of the QAC class, such as ethyl and isopropyl alcohols, glutaraldehyde, non-ionic surfactants, stabilizers, etc. Regarding the HPLC-UV method, we were particularly interested in the selectivity with respect to other quaternary ammonium salts, such as didecyldimethylammonium chloride (DDAC) and cationic surfactants.
