In this review, the basic principles underlying the design and application of permeation tubes and permeators are discussed. The fundamental theory is cast in terms of Fick's Laws and Henry's law. The various types of polymer materials and permeation tube devices are then discussed, with a view toward the final application of the devices. Finally, calibration and and lifetime issues are treated.

No abstract

The key comparison CCQM-K76 was designed to test the capabilities of the participants to measure and certify sulfur dioxide in nitrogen, and to provide supporting evidence for the CMCs of these institutes for sulfur dioxide. Also, as sulfur dioxide is designated a core compound, and the 100 µmol/mol concentration is within the designated core compound concentration range, this comparison was also designed to demonstrate core capabilities of institutes which qualify under the rules of the Gas Analysis Working Group.The results of all 16 participants in this key comparison, except for three, are consistent with their key comparisons reference values. The three participants which are outside the KCRV interval are NIM, SMU and NPLI. This comparison may be used to demonstrate core analytical capabilities in accordance with the rules and procedures of the CCQM Gas Analysis Working group.Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/.The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).

Carbon monoxide (CO) is reported to mainly be emitted from industries, transportation, and burnings for various usages. Its atmospheric lifetime varies from weeks to months, depending on the mixing ratio of the highly reactive hydroxyl radical. Even though the ambient level of CO varies as a function of regional sources, the mixing ratio ranges from 30 nmol/mol to 300 nmol/mol at the marine boundary layers and from 100 nmol/mol to more than 500 nmol/mol in urban areas(1). In order to study temporal trends and regional variations of the level of CO, the National Oceanic & Atmospheric Administration/Earth System Research Laboratory-Global Monitoring Division (NOAA/ESRL-GMD(2)) has played a key role as the designated Central Calibration Laboratory (CCL) within the frame of the World Meteorological Organization (WMO) Global Atmosphere Watch (GAW) program. NOAA/ESRL-GMD provides natural air standards, analyzed for CO, to WMO GAW participants. Since the structure of WMO traceability chain appears hierarchical and explicit all over the world, WMO intends to improve the CO measurement compatibility to up to 2 ppb (in case of extensive compatibility goal: 5 ppb, GAW report No. 213(3)) in order to ensure compatibility through the GAW network. Nevertheless, accurate measurement of CO at an ambient level has proven to be difficult due to the lack of stability in cylinders. For these reasons, it is necessary that measured results are compared among the values assigned by various NMIs. This key comparison was initially proposed to be aimed at a CO/N2 standard in the 2010 CCQM meeting by KRISS. With participation of FMI, NOAA, and Empa, a modified scheme of CO/air standards was developed for the purpose of atmospheric observations and co-operative support to WMO/GAW activities. Therefore, the purpose of the comparison is to support the measurement capability of CO at an ambient level of 350 nmol/mol. Further, this key comparison is expected to contribute to the establishment of traceability to a single scale of CO between NMIs by means of harmonizing the results from different national standards. The Empa result lies in a different report. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

The "piezogalvanic effect" is an electrical response produced by the application of an asymmetric external force to a symmetrical solid electrolyte cell. An experimental study of this effect in a solid ionic conductor has been conducted. Parameters controlling the effect were found to be fabrication procedures, electrodes, and stress produced by the applied force. Tests demonstrated that the effect was present under both static and cyclic conditions. Observations lead to the conclusion that the piezogalvanic effect is established by an interfacial (faradaic) process rather than any process associated solely with the mechanical and physical properties of either the electrolyte or the electrode.When a unidirectional force is applied to one face of a symmetrical solid electrolyte cell such as Ag/AgI/ Ag a potential is generated and a current flows in an * Electrochemical Society Active Member. Key words: piezogalvanic effect, solid electrolyte cycling test. ) unless CC License in place (see abstract). ecsdl.org/site/terms_use address. Redistribution subject to ECS terms of use (see 131.215.225.9 Downloaded on 2015-06-21 to IP ) unless CC License in place (see abstract). ecsdl.org/site/terms_use address. Redistribution subject to ECS terms of use (see 131.215.225.9 Downloaded on 2015-06-21 to IP Vol. 120, No. 2 THE PIEZOGALVANIC EFFECT 239 ) unless CC License in place (see abstract). ecsdl.org/site/terms_use address. Redistribution subject to ECS terms of use (see 131.215.225.9 Downloaded on 2015-06-21 to IP