Distribution system state estimation (DSSE) is a valuable step for DSOs toward tackling the challenges of transitioning to a more sustainable energy system and the evolution and proliferation of electric cars and power electronic devices. However, on the LV level, implementation has only taken place in a few pilot projects. In this paper, an LV DSSE method is presented and implemented in four real Hungarian LV supply areas, according to well-defined scenarios. Pseudo-measurement datasets are generated from AACs and SLPs, which have been used in different combinations on networks built with different accuracies in terms of load placement. The paper focuses on the critical aspects of finding accurate and coherent information on network topology with automated management of information systems, real LV network implementation for power flow calculation and managing portions of the network characterized by uncertain or inconsistent line lengths. A refining algorithm is implemented for the integrated network information system (INIS) models. The published method estimates node voltages with a relative error of less than 1% when using AACs, and a meter-placement method to reduce the maximum value of relative errors in future scenarios is also presented. It is shown that the observation of node voltages can be improved with the usage of AACs and SLPs, and with optimal meter placement.

Effective infrastructure monitoring is a priority in all technical fields in this century. In high-voltage transmission networks, line inspection is one such task. Fault detection of insulators is crucial, and object detection algorithms can handle this problem. This work presents a comparison of You Only Look Once architectures. The different subtypes of the last three generations (v3, v4, and v5) are compared in terms of losses, precision, recall, and mean average precision on an open-source, augmented dataset of normal and defective insulators from the State Grid Corporation of China. The primary focus of this work is a comprehensive subtype analysis, providing a useful resource for academics and industry professionals involved in insulator detection and surveillance projects. This study aims to enhance the monitoring of insulator health and maintenance for industries relying on power grid stability. YOLOv5 subtypes are found to be the most suitable for this computer vision task, considering their mean average precision, which ranges between 98.1 and 99.0%, and a frame per second rate between 27.1 and 212.8, depending on the architecture size. While their predecessors are faster, they are less accurate. It is also discovered that, for all generations, normal-sized and large architectures generally demonstrate better accuracy. However, small architectures are noted for their significantly faster processing speeds.