Due to high metal prices and increased difficulties in finding shallower deposits, the exploration for and exploitation of mineral resources is expected to move to greater depths. Consequently, seismic methods will become a more important tool to help unravel structures hosting mineral deposits at great depth for mine planning and exploration. These methods also can be used with varying degrees of success to directly target mineral deposits at depth. We review important contributions that have been made in developing these techniques for the mining industry with focus on four main regions: Australia, Europe, Canada, and South Africa. A wide range of case studies are covered, including some that are published in the special issue accompanying this article, from surface to borehole seismic methods, as well as petrophysical data and seismic modeling of mineral deposits. At present, high-resolution 2D surveys mostly are performed in mining areas, but there is a general increasing trend in the use of 3D seismic methods, especially in mature mining camps.

Three-dimensional seismic reflection data from the Halfmile Lake area, New Brunswick, Canada, was reprocessed over an 18- [Formula: see text] grid to improve the seismic signatures of a 5-million-ton volcanic-hosted massive sulfide (VHMS) deposit located at 1200-m depth, known as the deep zone, as well as key host-rock structures. We chose a prestack dip moveout (DMO) and poststack migration processing sequence to preserve the possible diffraction signature of the deep VHMS zone. Despite the high level of source-generated noise and large statics caused by near-surface conditions, our processing results revealed improved 3D seismic images for shallow and deep structures. Many of the imaged structures were easily correlated with known lithological con-tacts constrained by boreholes and petrophysical measurements. A short, flat-lying segment of high-amplitude reflection at about 800-m depth in the unmigrated cube was interpreted to originate from a small portion of the lower VHMS zone. The DMO stack was characterized by a large, high-amplitude asymmetric diffraction signature originating from the deep VHMS zone. The asymmetry of the diffraction hyperbola relative to the location of the deep zone was interpreted as resulting from a shape effect from the zone, with the strongest amplitudes along the diffraction hyperbola found north-northwest of the apex. This indicated that the deep VHMS zone dips in a similar direction. This diagnostic diffraction signature was not preserved with the prestack migration approach previously implemented for processing Halfmile Lake data.

We have analyzed and processed a [Formula: see text] nonorthogonal 3D surface reflection seismic data in the Brunswick no. 6 area to better understand the effect of acquisition geometry on the resultant image and to provide 3D information about the main geologic structures hosting the mineralization. The 3D data were processed using a conventional prestack dip moveout (DMO) and poststack migration algorithm with special focus on refraction static corrections, velocity analysis, and DMO corrections that are important for the data recorded in crystalline environment. However, the nonorthogonal nature of the 3D data combined with its narrow-azimuth, irregular offset distributions, and 2D nature of midpoint distribution in common depth point bins resulted in a lower quality seismic image than those observed on a series of 2D seismic profiles collected in the area prior to the 3D data acquisition. 2D wavenumber spectrum of the data suggests acquisition footprint associated with the data. Most of the noise associated with the acquisition footprint manifested itself as short-length, high-amplitude shallow reflections but largely were attenuated using a dip filter running in the wavenumber domain. Various bin size and geometries were tested, and the best result was obtained using rectangular bins aligned in the orientation of the shot lines. The processing results indicated that the highly prospective and mineralized Brunswick horizon is part of a continuous reflective package that could guide future deep mineral exploration in this mining camp.

No abstract