The shipping industry is becoming increasingly aware of its environmental responsibilities in the long-term. In 2018, the International Maritime Organization (IMO) pledged to reduce greenhouse gas (GHG) emissions by at least 50% by the year 2050 as compared with a baseline value from 2008. Ammonia has been regarded as one of the potential carbon-free fuels for ships based on these environmental issues. In this paper, we propose four propulsion systems for a 2500 Twenty-foot Equivalent Unit (TEU) container feeder ship. All of the proposed systems are fueled by ammonia; however, different power systems are used: main engine, generators, polymer electrolyte membrane fuel cell (PEMFC), and solid oxide fuel cell (SOFC). Further, these systems are compared to the conventional main engine propulsion system that is fueled by heavy fuel oil, with a focus on the economic and environmental perspectives. By comparing the conventional and proposed systems, it is shown that ammonia can be a carbon-free fuel for ships. Moreover, among the proposed systems, the SOFC power system is the most eco-friendly alternative (up to 92.1%), even though it requires a high lifecycle cost than the others. Although this study has some limitations and assumptions, the results indicate a meaningful approach toward solving GHG problems in the maritime industry.

The primary electric power system of ships has been based on the alternating current (AC) system for a long time. However, marine engineers started to question the efficiency of the ACgrid system, which was previously taken for granted and attempted to find a more efficient and eco-friendly electric power distribution system. Following this trend in the marine industry, the direct current (DC) system was adopted for the electric distribution system in ships and combined with the AC-grid. In this regard, this paper presents the technical, economic, and environmental benefits of the DC-grid system for marine applications. Ships that have already applied or plan to apply the DC-grid system are categorized into several types. Additionally, some technical considerations focused on the fault protection topology, the power-sharing (balancing) topology, power quality/stability issues, power source control methods, DC arc flash hazard, and international regulations/standards regarding DC-grid ships are reviewed. Lastly, the prospects of the DC-grid system in ships are addressed with a conclusion.

Liquefied natural gas (LNG) is recognized as a preferable alternative fuel for ship owners, since it can substantially reduce harmful emissions to comply with stricter environmental regulations. The increasing number of LNG-fueled vessels has driven up the number of LNG bunkering vessels (LNGBVs) as well. A key issue of LNGBVs is boil-off gas (BOG) generation, especially the huge amount of BOG that is generated during loading and unloading (bunkering) processes. This study proposes a hybrid system that combines conventional onboard LNG-fueled generators with an energy storage system (ESS) to solve the BOG issue of LNGBVs. This hybrid system is targeted at an LNGBV with the cargo capacity of 5000 m3. The amount of BOG generation is calculated based on assumed operation modes, and the economic study and the environmental analysis are performed based on the results. By comparing the conventional system to the proposed ones, some benefits can be verified: about 46.2% BOG reduction, 66.0% fuel saving, a 7.6-year payback period, and 4.8 tons of greenhouse gas (GHG) reduction for one voyage in the best case, with some assumptions. This proposed hybrid system using the ESS could be an attractive green solution to LNGBV owners.

The need for technological development to reduce the impact of air pollution caused by ships has been strongly emphasized by many authorities, including the International Maritime Organization (IMO). This has encouraged research to develop an electric propulsion system using hydrogen fuel with the aim of reducing emissions from ships. This paper describes the test bed we constructed to compare our electric propulsion system with existing power sources. Our system uses hybrid power and a diesel engine generator with a combined capacity of 180 kW. To utilize scale-down methodology, the linear interpolation method is applied. The proposed hybrid power source consists of a molten carbonate fuel cell (MCFC), a battery, and a diesel generator, the capacities of which are 100 kW, 30 Kw, and 50 kW, respectively. The experiments we conducted on the test bed were based on the outcome of an analysis of the electrical power consumed in each operating mode considering different types of merchant ships employed in practice. The output, fuel consumption, and CO2 emission reduction rates of the hybrid and conventional power sources were compared based on the load scenarios created for each type of ship. The CO2 emissions of the hybrid system was compared with the case of the diesel generator alone operation for each load scenario, with an average of 70%~74%. This analysis confirmed the effectiveness of using a ship with a fuel-cell-based hybrid power source.

Concerns about harmful exhaust emissions from ships have been an issue. Specifically, the emissions at ports are the most serious. This paper introduces a hybrid power system that combines conventional diesel generators with two different energy storage systems (ESSs) (lithium-ion batteries (LIB) and supercapacitors (SC)) focused on port operations of ships. To verify the proposed system, a bulk carrier with four deck cranes is selected as a target ship, and each size (capacity) of LIB and SC is determined based on assumed power demands. The determined sizes are proven to be sufficient for a target ship through simulation results. Lastly, the proposed system is compared to a conventional one in terms of the environmental and economic aspects. The results show that the proposed system can reduce emissions (CO2, SOX, and NOx) substantially and has a short payback period, particularly for ships that have a long cargo handling time or visit many ports with a short-term sailing time. Therefore, the proposed system could be an eco-friendly and economical solution for bulk carriers for emission problems at ports.