Nanoimprinting promises low-cost fabrication of micro- and nano-devices by embossing features from a hard mould onto thermoplastic materials, typically polymers with low glass transition temperature. The success and proliferation of such methods critically rely on the manufacturing of robust and durable master moulds. Silicon-based moulds are brittle and have limited longevity. Metal moulds are stronger than semiconductors, but patterning of metals on the nanometre scale is limited by their finite grain size. Amorphous metals (metallic glasses) exhibit superior mechanical properties and are intrinsically free from grain size limitations. Here we demonstrate direct nanopatterning of metallic glasses by hot embossing, generating feature sizes as small as 13 nm. After subsequently crystallizing the as-formed metallic glass mould, we show that another amorphous sample of the same alloy can be formed on the crystallized mould. In addition, metallic glass replicas can also be used as moulds for polymers or other metallic glasses with lower softening temperatures. Using this 'spawning' process, we can massively replicate patterned surfaces through direct moulding without using conventional lithography. We anticipate that our findings will catalyse the development of micro- and nanoscale metallic glass applications that capitalize on the outstanding mechanical properties, microstructural homogeneity and isotropy, and ease of thermoplastic forming exhibited by these materials.

Bulk metallic glasses (BMGs) are strong, highly elastic, and resistant to wear but still find limited utility due to their macroscopic brittle nature, high costs, and difficulty of processing, particularly when complex shapes are desired. These drawbacks can be mitigated when BMGs are used in miniature parts (< 1 cm), an application which takes advantage of BMGs' enhanced plasticity at small length scales as well the insignificant material cost associated with such parts. As an alternative to traditional metal processing techniques, thermoplastic forming (TPF)-based microfabrication methods have been developed which can process some BMGs like plastics. In this article, we discuss the properties and fabrication of BMGs on minuscule length scales to explore their prospective application in small-scale devices.

Electrochemical devices have the potential to pose powerful solutions in addressing rising energy demands and counteracting environmental problems. However, currently, these devices suffer from meager performance due to poor efficiency and durability of the catalysts. These suboptimal characteristics have hampered widespread commercialization. Here we report on Pt(57.5)Cu(14.7)Ni(5.3)P(22.5) bulk metallic glass (Pt-BMG) nanowires, whose novel architecture and outstanding durability circumvent the performance problems of electrochemical devices. We fabricate Pt-BMG nanowires using a facile and scalable nanoimprinting approach to create dealloyed high surface area nanowire catalysts with high conductivity and activity for methanol and ethanol oxidation. After 1000 cycles, these nanowires maintain 96% of their performance-2.4 times as much as conventional Pt/C catalysts. Their properties make them ideal candidates for widespread commercial use such as for energy conversion/storage and sensors.

No abstract

A long-sought goal in metallic glasses is to impart ductility without conceding their strength and elastic limit. The rational design of tough metallic glasses, however, remains challenging because of the inability of existing theories to capture the correlation between plasticity, composition and processing for a wide range of glass-forming alloys. Here we propose a phenomenological criterion based on a critical fictive temperature, Tfc, which can rationalize the effect of composition, cooling rate and annealing on room-temperature plasticity of metallic glasses. Such criterion helps in understanding the widespread mechanical behaviour of metallic glasses and reveals alloy-specific preparation conditions to circumvent brittleness.