Peptide-based nanostructures derived from natural amino acids are superior building blocks for biocompatible devices as they can be used in a bottom-up process without the need for expensive lithography. A dense nanostructured network of l,l-diphenylalanine (FF) was synthesized using the solid-vapor-phase technique. Formation of the nanostructures and structure-phase relationship were investigated by electron microscopy and Raman scattering. Thin films of l,l-diphenylalanine micro/nanostructures (FF-MNSs) were used as the dielectric layer in pentacene-based field-effect transistors (FETs) and metal-insulator-semiconductor diodes both in bottom-gate and in top-gate structures. Bias stress studies show that FF-MNS-based pentacene FETs are more resistant to degradation than pentacene FETs using FF thin film (without any nanostructures) as the dielectric layer when both are subjected to sustained electric fields. Furthermore, it is demonstrated that the FF-MNSs can be functionalized for detection of enzyme-analyte interactions. This work opens up a novel and facile route toward scalable organic electronics using peptide nanostructures as scaffolding and as a platform for biosensing.

We examine the role of solvents in the performance of pentacene devices using the ferroelectric copolymer poly(vinylidene fluoride-co-trifluoroethylene) (PVDF-TrFe) as a gate insulating layer. High dipole moment solvents, such as dimethyl sulfoxide (DMSO), used to dissolve the copolymer for spincasting, increase the charge carrier mobility in field-effect transistors by nearly an order of magnitude as compared to lower dipole moment solvents. The polarization in Al/PVDF-TrFe/Au metal-ferroelectric-metal devices is also investigated. An increase in remnant polarization of ∼20% is observed in the sample using DMSO as the ferroelectric solvent. The DMSO based sample shows a hysteresis in its displacement curve even at the lowest measured voltage, indicating that the dipoles in the copolymer are more ordered initially.

Low‐operating voltage, high mobility, and stable organic field‐effect transistors (OFETs) using polymeric dielectrics such as pristine poly(4‐vinyl phenol) (PVP) and poly(methyl methacrylate) (PMMA), dissolved in solvents of high dipole moment, have been achieved. High dipole moment solvents such as propylene carbonate and dimethyl sulfoxide used for dissolving the polymer dielectric enhance the charge carrier mobilities by three orders of magnitude in pentacene OFETs compared with low dipole moment solvents. Fast switching circuits with patterned gate PVP‐based pentacene OFETs demonstrated a switching frequency of 75 kHz at input voltages of |5 V|. The frequency response of the OFETs is attributed to a high degree of dipolar‐order in dielectric films obtained from high‐polarity solvents and the resulting energetically ordered landscape for transport. Remarkably, these pentacene‐based OFETs exhibited high stability under bias stress and in air with negligible shifts in the threshold voltage. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1533–1542

Inkjet and other forms of printing are now popular deposition techniques for the various layers in organic electronic devices, which are crucial for the development of large-scale, low-cost, and flexible electronics. Along with the ease of deposition, inkjet printing provides better control of the organic semiconductor-dielectric interface in field-effect transistors (FETs) and metal-insulator-semiconductor (MIS) diodes, compared to other deposition techniques. We compare the electrical characteristics of inkjet-printed and spincoated poly-4-vinyl phenol (PVP) dielectric layers in pentacene-based and 6, 13-bis(triisopropylsilylethynyl) (TIPS)-pentacene-based FETs and MIS structures. Printed PVP films provide a natural alignment for the growth of TIPS-pentacene, thus improving the interface. TIPS-pentacene on printed PVP shows an order of magnitude higher FET charge carrier mobility compared to TIPS-pentacene on spincoated PVP FETs. Capacitance-voltage and conductance-voltage investigations of the MIS structures yield a lower value for the interface trap density for the printed PVP TIPS-pentacene device compared to the spincoated PVP TIPS-pentacene diode. Thermally grown pentacene on printed and spincoated PVP shows similar performance in MIS and FET structures.

While the electrical transport characteristics of organic electronic devices are generally inferior to their inorganic counterparts, organic materials offer many advantages over inorganics. The materials used in organic devices can often be deposited using cheap and simple processing techniques such as spincoating, inkjet printing, or roll-to-roll processing; allow for large-scale, flexible devices; and can have the added benefits of being transparent or biodegradable. In this manuscript, we examine the role of solvents in the performance of pentacene-based devices using the ferroelectric copolymer polyvinylidene fluoride-trifluoroethylene (PVDF-TrFe) as a gate insulating layer. High dipole moment solvents, such as dimethyl sulfoxide, used to dissolve the copolymer for spincoating increase the charge carrier mobility in field-effect transistors (FETs) by nearly an order of magnitude as compared to lower dipole moment solvents. The polarization in Al/PVDF-TrFe/Au metal-ferroelectric-metal devices also shows an increase in remnant polarization of ~20% in the sample using dimethyl sulfoxide as the solvent for the ferroelectric. Interestingly, at low applied electric fields of ~100 MV/m a remnant polarization is seen in the high dipole moment device that is nearly 3.5 times larger than the value observed in the lower dipole moment samples, suggesting that the degree of dipolar order is higher at low operating voltages for the high dipole moment device. This work shows that the performance of electronic devices can be improved simply by selection of fabrication materials, potentially opening up simpler fabrication processes for large scale manufacturing of organic electronics. We will also discuss the use of peptide-based nanostructures derived from natural amino acids as building blocks for biocompatible devices. These peptides can be used in a bottom-up process without the need for expensive lithography. Thin films of L,L-diphenylalanine micro/nanostructures (FF-MNSs) were used as the dielectric layer in pentacene-based FETs and metalinsulator-semiconductor diodes both in bottom-gate and top-gate structures. It is demonstrated that the FF-MNSs can be functionalized for detection of enzyme-analyte interactions. This work opens up a novel and facile route towards scalable organic electronics using peptide nanostructures as scaffolding and as a platform for biosensing.