To explore the efficacy of using a far infrared thermal camera with a haptic display to assist blind people in identifying humans, we performed experiments with a prototype device on five low-vision (functionally blind) subjects. Infrared allows for easy detection of human shape due to typically high contrast in temperatures from a person against their surrounding environment. Infrared cameras can be made small and inexpensive with uncooled microbolometer technology. Our study showed a great willingness by the blind subjects to use such a device after a short training session and both successful and unsuccessful operation. Future work will further develop the technology and undertake more expansive testing.

Abrasion-induced insulation breach is a common failure mode of silicone-body, transvenous, implantable cardioverter defibrillator leads. It is caused either by external compression or internal motion of conducting cables. The present method of monitoring lead integrity measures low frequency conductor impedance. It cannot detect insulation failures until both the silicone lead body and inner fluoropolymer insulation have been breached completely, exposing conductors directly to blood or tissue. Thus the first clinical presentation may be either failure to deliver a life-saving shock or painful, inappropriate shocks in normal rhythm. We present a new method for identifying lead failure based on high frequency impedance measurements. This method was evaluated in 3D electromagnetic simulation and bench testing to identify insulation defects in the St. Jude Medical Riata® lead, which is prone to insulation breach.

Following a critical illness, technology-dependent children on chronic ventilator support require specialized care to facilitate recovery and rehabilitation that minimally impedes social and psychological development. Intervention strategies have been confounded by the need for frequent assessment via physical exam in a relatively immobile patient population. The availability of technology that enables effective, timely, and reliable information transfer between the homecare providers and the attending pulmonologist is likely to decrease the need for transport and hospitalization, and provide a dramatically increased level of comfort for care givers in the home and ultimately the children. A Pulmonetic Systems LTV 1200 ventilator was enabled with a wireless cellular interface to make its settings and performance data real-time accessible over a secure wireless Internet connection. A complete web-browser ventilator interface program was specified, coded, and tested. The live web interface was used to support a formal survey of pediatric pulmonologists to help gauge the potential medical utility of the new remote interface to the ventilator. The survey results were overwhelmingly supportive of the concept, and the pulmonologists listed many varied ways that the data could have utility in their patient populations.

Abrasion-induced insulation breach is a common failure mode of silicone-body, transvenous, implantable cardioverter defibrillator leads. It is caused either by external compression or internal motion of conducting cables. The present method of monitoring lead integrity measures low frequency conductor impedance. It cannot detect insulation failures until both the silicone lead body and inner fluoropolymer insulation have been breached completely, exposing conductors directly to blood or tissue. Even then the resistance changes are usually swamped by the baseline values. Thus the first clinical presentation may be either failure to deliver a life-saving shock or painful, inappropriate shocks in normal rhythm. We have previously presented a method for identifying early lead failure based on high frequency transmission line impedance measurements. That work used fresh leads in a liquid simulation bath; we have now demonstrated similar effects in leads soaked for 32 days and hence with saline-saturated silicone lead bodies.

Visually-impaired people have difficulty detecting objects beyond the reach of a cane. We functionally coupled a far-infrared camera to a linear array of tactile elements to create a thermal tactile viewer that enhances environmental awareness. Users may scan such a device across a scene to spatially locate people. We observed in a series of acuity-measuring tasks, at twenty feet of observer/subject separation, observers could resolve two people standing four inches apart (a separation angle of 1 degrees ) and locate the angular position of people within a room with 78% accuracy. Additionally, when employing a technique involving two sweeps from two observation points separated by approximately an arm span, subjects correctly reported observer/subject separation distance with 60% accuracy. These observations suggest the technique of information transfer provided by a thermal tactile viewing device provides the fundamental acuity required for an assistive locating device.