No abstract

We synthesized the needle-like cobalt oxide/graphene composites with different mass ratios, which are composed of cobalt oxide (Co3O4 or CoO) needle homogeneously anchored on graphene nanosheets as the template, by a facile hydrothermal method. Without the graphene as the template, the cobalt precursor tends to group into urchin-like spheres formed by many fine needles. When used as electrode materials of aqueous supercapacitor, the composites of the needle-like Co3O4/graphene (the mass ratio of graphene oxide(GO) and Co(NO3)2·6H2O is 1:5) exhibit a high specific capacitance of 157.7 F g(-1) at a current density of 0.1 A g(-1) in 2 mol L(-1) KOH aqueous solution as well as good rate capability. Meanwhile, the capacitance retention keeps about 70% of the initial value after 4000 cycles at a current density of 0.2 A g(-1). The enhancement of excellent electrochemical performances may be attributed to the synergistic effect of graphene and cobalt oxide components in the unique multiscale structure of the composites.

No abstract

A well-designed nanostructure CNT@TiO2-C with fine anatase TiO2 particle (< 8 nm), good electronic conducting network (inner CNT core and outer carbon layer), and mesoporous structure was prepared by a simple and green one-pot hydrothermal reaction. The utilization of glucose in the hydrothermal process not only solves the interfacial incompatibility between CNTs and titanate sol and controls the nucleation and growth of TiO2 particles, but also introduces a uniform, glucose-derived, carbon-layer on the TiO2 particles. The nanosized TiO2 particle, high conducting network, and interconnected nanopores of the CNT@TiO2-C nanocable greatly improve its electrochemical performances, especially rate capability. The CNT@TiO2-C nanocables show remarkable rate capability with reversible charge capacity of 297, 240, 210,178 and 127 mAh g−1 at 1C, 5C, 10C, 20C and 50C, respectively, as well as excellent high rate cycling stability with capacity retention of 87% after 2000 cycles at 50C.

Nano‐TATB was prepared by solvent/nonsolvent recrystallization with concentrated sulfuric acid as solvent and water as nonsolvent. Transmission Electron Microscopy (TEM) and Atomic Force Microscopy (AFM) were used to characterize the appearance and the size of the particles. The results revealed that nano‐TATB particles have the shape of spheres or ellipsoids with a size of about 60 nm. Due to their small diameter and high surface energy, the particles tended to agglomerate. By using X‐ray powder diffraction (XRD), broadening of diffraction peaks and decreasing intensity were observed, when the particle sizes decreases to the nanometer size range. The corrected average particle size of nano‐TATB was estimated using the Scherrer equation and the size ranged from 27 nm to 41 nm. Furthermore, the specific surface area and pore diameter of nano‐TATB were determined by BET method. The values were 22 m2/g and 1.7 nm respectively. Thermogravimetric (TG) and Differential Scanning Calorimetric (DSC) curves revealed that thermal decomposition of nano‐TATB occurs in the range of 356.5 °C–376.5 °C and its weight loss takes place at about 230 °C. Furthermore, a slight increase in the weight loss was observed for nano‐TATB in comparison with micro‐TATB.