No abstract

Previously, we have reported the development of a miniature mass spectrometer with a continuous atmospheric pressure interface (CAPI), and the use of it for non-volatile sample analysis, such as drugs, peptides and proteins. However due to the diffusion effects in the CAPI, especially stronger for light ions, the instrument shows low detection sensitivities for volatile samples when coupling with an atmosphere pressure chemical ionization (APCI) source (>ppmv). In this study, an in-vacuum plasma ionization source was designed and integrated into the system. By performing ionization in the first vacuum stage, ion transfer loss through the CAPI was minimized and tens of ppbv level detection sensitivities were achieved for volatile samples. Due to its improved sensitivity, chemical source tracing was demonstrated in an indoor environment as a simple proof-of-concept example. Furthermore, an aerodynamic sampling method was developed to facilitate directional sample transfer towards the miniature mass spectrometer in an open environment. By coupling this aerodynamic method with the miniature mass spectrometer, remote chemical source sensing could be achieved at a distance of more than two meters. This aerodynamic sampling method could also be applied to other mass spectrometry instruments for enhanced sample sampling in open environments.

Properties of extruded polymers are strongly affected by molecular structure. For two different semi-crystalline polymers, low-density polyethylene (LDPE) and ultra-high molecular weight polyethylene (UHMWPE), this investigation measures the elastic modulus, plastic flow stress and strain-rate dependence of yield stress. Also, it examines the effect of molecular structure on post-necking tensile fracture. The static and dynamic material tests reveal that extruded UHMWPE has a somewhat larger yield stress and much larger strain to failure than LDPE. For both types of polyethylene, the strain at tensile failure decreases with increasing strain-rate. For strain-rates 0.001-3400 s´1, the yield stress variation is accurately represented by the Cowper-Symonds equation. These results indicate that, at high strain rates, UHMWPE is more energy absorbent than LDPE as a result of its long chain molecular structure with few branches.

No abstract