No abstract

A large superconducting coil wound with Cable-inConduit (CIC) conductor caused an irregular AC loss that cannot be estimated from short conductor sample test results. It was confirmed that the irregular AC loss was generated by long current loops in the CIC conductor. We proposed a mechanism forming the long loops. The CIC conductor is composed of several staged sub-cables. If one strand on the surface of a sub-cable contacts with the other strand on the surface of the adjacent sub-cable, the two strands must encounter each other again at LCM (Least Common Multiplier) distance of all staged cable pitches and thereby result in forming a pair of a long loop. We measured cross over point contact resistance between two strands making the long loop. The calculated time constants of the long loops were shorter than the observed ones. We orderly labeled all strands in a real CIC conductor, disassembling carefully the cable after peeling the conduit. It was found that the strands in a triplet were widely displaced from their original positions, and thereby their contacting lengths became longer than cross over ones to form line contacts. This fact can make the time constant of the loop longer and hence can explain the observed long time constants.

SUMMARYA large superconducting coil wound with a Cable-inConduit (CIC) conductor caused an additional AC loss, which cannot be estimated from the short conductor sample test results. It was confirmed that the additional AC loss was generated by long current loops in the CIC conductor. Magnetic field decays of the loops with various long-time constants were observed through Hall probes. We propose a mechanism for the formation of the long loops. The CIC conductor is composed of several staged subcables. If one strand on the surface of a subcable contacts the other strand on the surface of the adjacent subcable, the two strands must encounter each other again at the LCM (Least Common Multiplier) distance of all staged cable pitches and thereby form a pair of long loops. We numerically traced each strand in the CIC according to a method in which the subcables at all substages rotate around the center of inertia. The calculated long-time constants of the long loops were slightly shorter than the observed ones. We labeled all strands by order in a real CIC conductor, disassembling the cable carefully after peeling the conduit. It was found that the strands in a triplex were widely displaced from their original positions, so that their contacting lengths became longer than the calculated ones. This fact makes the time constant of the loop longer and hence can explain the observed long-time constants. The proposed mechanism is effective for estimating the long loops causing additional AC losses in the coil.

A large superconducting coil wound with a Cable‐in‐Conduit (CIC) conductor caused an additional AC loss, which cannot be estimated from the short conductor sample test results. It was confirmed that the additional AC loss was generated by long current loops in the CIC conductor. Magnetic field decays of the loops with various long‐time constants were observed through Hall probes. We propose a mechanism for the formation of the long loops. The CIC conductor is composed of several staged subcables. If one strand on the surface of a subcable contacts the other strand on the surface of the adjacent subcable, the two strands must encounter each other again at the LCM (Least Common Multiplier) distance of all staged cable pitches and thereby form a pair of long loops. We numerically traced each strand in the CIC according to a method in which the subcables at all substages rotate around the center of inertia. The calculated long‐time constants of the long loops were slightly shorter than the observed ones. We labeled all strands by order in a real CIC conductor, disassembling the cable carefully after peeling the conduit. It was found that the strands in a triplex were widely displaced from their original positions, so that their contacting lengths became longer than the calculated ones. This fact makes the time constant of the loop longer and hence can explain the observed long‐time constants. The proposed mechanism is effective for estimating the long loops causing additional AC losses in the coil. © 2003 Wiley Periodicals, Inc. Electr Eng Jpn, 143(1): 50–57, 2003; Published online in Wiley InterScience (http://www.interscience.wiley.com). DOI 10.1002/eej.10064