No abstract

A high-power narrow-linewidth 1.55 μm pulsed laser, based on MgO:PPLN OPO, has been achieved using a F–P etalon. The pump source is a 1064 nm acousto-optical (AO) Q-switched Nd:YAG laser with a repetition rate of 10 kHz. Under the maximum pump power of 18 W, the signal output power of 2.57 W is demonstrated at 1551.1 nm with a linewidth of 0.07 nm, corresponding to a slope efficiency of 16.1%. Different from traditional inversion lasers, the narrow-linewidth wavelength tunability of approximately 1.55 μm can be realized by changing the temperature.

We report on a high-power acoustic-optical (AO) Q-switched Tm:YLF laser operating at ~1.83 μm by controlling the transmittance of the output coupler. Under the continuous-wave (CW) operation, the maximum output power of 13 W is achieved, and the slope efficiency is up to 32.7%. With a YAG etalon inserted into the cavity, the linewidth is compressed below 0.5 nm with a maximum output power of 12.2 W. In the Q-switched state, the maximum pulsed output power of 10.32 W is achieved with a pulse duration of 150 ns when the repetition rate is 15 kHz. And the maximum pulsed energy of 1.13 mJ is generated with a duration of 131 ns at 5 kHz. As far as we know, this is the highest output power reported for the CW and pulsed 1.83 μm laser. In addition, the relationship between the output wavelength and crystal length is theoretically analyzed, which shows that increasing the loss of 1880 nm is the key to high-power 1.83 μm laser output.

No abstract