Morphing wings have a large potential to improve the overall aircraft performances, in a way like natural flyers do. By adapting or optimising dynamically the shape to various flight conditions, there are yet many unexplored opportunities beyond current proof-of-concept demonstrations. This review discusses the most prominent examples of morphing concepts with applications to two and threedimensional wing models. Methods and tools commonly deployed for the design and analysis of these concepts are discussed, ranging from structural to aerodynamic analyses, and from control to optimisation aspects. Throughout the review process, it became apparent that the adoption of morphing concepts for routine use on aerial vehicles is still scarce, and some reasons holding back their integration for industrial use are given. Finally, promising concepts for future use are identified.

PurposeThe purpose of this paper is to describe the pre‐design and sizing of a smart leading edge section which is developed in the project SADE (Smart High Lift Devices for Next Generation Wings), which is part of the seventh framework program of the EU.Design/methodology/approachThe development of morphing technologies in SADE concentrates on the leading and trailing edge high‐lift devices. At the leading edge a smart gap and step‐less droop nose device is developed. For the landing flap a smart trailing edge of the flap is in the focus of the research activities. The main path in SADE follows the development of the leading edge section and the subsequent wind tunnel testing of a five meter span full‐scale section with a chord length of three meters in the wind tunnel T‐101 at the Russian central aero‐hydrodynamic institute (TsAGI) in Moscow.FindingsThe presented paper gives an overview over the desired performance and requirements of a smart leading edge device, its aerodynamic design for the wind tunnel tests and the structural pre‐design and sizing of the full‐scale leading edge section which will be tested in the wind tunnel.Originality/valueSADE aims at a major step forward in the development and evaluation of the potential of morphing airframe technologies.

No abstract

No abstract

Purpose The purpose of this paper is to provide an overview of the design and experimental work of compliant wing and wingtip morphing devices conducted within the EU FP7 project NOVEMOR and to demonstrate that the optimization tools developed can be used to synthesize compliant morphing devices. Design/methodology/approach The compliant morphing devices were “designed-through-optimization”, with the optimization algorithms including Simplex optimization for composite compliant skin design, aerodynamic shape optimization able to take into account the structural behaviour of the morphing skin, continuum-based and load path representation topology optimization methods and multi-objective optimization coupled with genetic algorithm for compliant internal substructure design. Low-speed subsonic wind tunnel testing was performed as an effective means of demonstrating proof-of-concept. Findings It was found that the optimization tools could be successfully implemented in the manufacture and testing stage. Preliminary insight into the performance of the compliant structure has been made during the first wind tunnel tests. Practical implications The tools in this work further the development of morphing structures, which when implemented in aircraft have potential implications to environmentally friendlier aircrafts. Originality/value The key innovations in this paper include the development of a composite skin optimization tool for the design of highly 3D morphing wings and its ensuing manufacture process; the development of a continuum-based topology optimization tool for shape control design of compliant mechanisms considering the stiffness and displacement functions; the use of a superelastic material for the compliant mechanism; and wind tunnel validation of morphing wing devices based on compliant structure technology.