The carbon-coated Ni(C) nanocapsules were prepared by a modified arc-discharge method in methane atmosphere. Its electromagnetic parameters were measured at 2–18GHz. It is observed that the natural resonance which appeared at 5.5GHz is dominant among microwave absorption properties of Ni(C) nanocapsules, as the consequence of the increased surface anisotropic energy for nanosized particles. The measured relative complex permittivity indicates that a high resistivity existed in Ni(C) nanocapsules samples. The maximum reflection loss of Ni(C) nanocomposites can reach 32dB at 13GHz with 2mm in thickness. The microwave absorptive mechanisms of Ni(C) nanocapsule absorbent were discussed.

Non-fullerene fused-ring electron acceptors boost the power conversion efficiency of organic solar cells, but they suffer from high synthetic cost and low yield. Here, we show a series of low-cost noncovalently fused-ring electron acceptors, which consist of a ladder-like core locked by noncovalent sulfur–oxygen interactions and flanked by two dicyanoindanone electron-withdrawing groups. Compared with that of similar but unfused acceptor, the presence of ladder-like structure markedly broadens the absorption to the near-infrared region. In addition, the use of intramolecular noncovalent interactions avoids the tedious synthesis of covalently fused-ring structures and markedly lowers the synthetic cost. The optimized solar cells displayed an outstanding efficiency of 13.24%. More importantly, solar cells based on these acceptors demonstrate very low non-radiative energy losses. This research demonstrates that low-cost noncovalently fused-ring electron acceptors are promising to achieve high-efficiency organic solar cells.

Carbon-coated Fe [Fe(C)] nanocapsules were synthesized by a modified arc-discharge method, and their microstructure and electromagnetic (EM) properties (2–18 GHz) were investigated by means of transmission electron microscopy, Raman spectroscopy and a network analyser. The reflection loss R of less than −20 dB was obtained in the frequency range 3.2–18 GHz. A minimum reflection loss of −43.5 dB was reached at 9.6 GHz with an absorber thickness of 3.1 mm. The in-depth study of relative complex permittivity and permeability reveals that the excellent microwave absorption properties are a consequence of a proper EM match in microstructure, a strong natural resonance, as well as multi-polarization mechanisms, etc.

Ni/polyaniline (PANi) nanocomposites were prepared by chemical polymerization, and electromagnetic characteristics were then studied at 2–18GHz. The permittivity of the Ni/PANi nanocomposite presents dual dielectric relaxations with increasing content of PANi to over 15.6wt%, which is ascribed to a cooperative consequence of the core/shell interfaces and the dielectric PANi shells. Additionally, the permeability presents a strong natural resonance around 2–8GHz, which is dominant among microwave magnetic loss. The proper matching of the permittivity and the permeability contributes to enhanced microwave absorption.

Carbides of groups IV through VI (Ti, V and Cr groups) have long been proposed as substitutes for noble metal-based electrocatalysts in polymer electrolyte fuel cells. However, their catalytic activity has been extremely limited because of the low density and stability of catalytically active sites. Here we report the excellent performance of a niobium-carbon structure for catalysing the cathodic oxygen reduction reaction. A large number of single niobium atoms and ultra small clusters trapped in graphitic layers are directly identified using state-of-the-art aberration-corrected scanning transmission electron microscopy. This structure not only enhances the overall conductivity for accelerating the exchange of ions and electrons, but it suppresses the chemical/thermal coarsening of the active particles. Experimental results coupled with theory calculations reveal that the single niobium atoms incorporated within the graphitic layers produce a redistribution of d-band electrons and become surprisingly active for O 2 adsorption and dissociation, and also exhibit high stability.