Carbon-coated Fe [Fe(C)] nanocapsules were synthesized by a modified arc-discharge method, and their microstructure and electromagnetic (EM) properties (2–18 GHz) were investigated by means of transmission electron microscopy, Raman spectroscopy and a network analyser. The reflection loss R of less than −20 dB was obtained in the frequency range 3.2–18 GHz. A minimum reflection loss of −43.5 dB was reached at 9.6 GHz with an absorber thickness of 3.1 mm. The in-depth study of relative complex permittivity and permeability reveals that the excellent microwave absorption properties are a consequence of a proper EM match in microstructure, a strong natural resonance, as well as multi-polarization mechanisms, etc.

Ni/polyaniline (PANi) nanocomposites were prepared by chemical polymerization, and electromagnetic characteristics were then studied at 2–18GHz. The permittivity of the Ni/PANi nanocomposite presents dual dielectric relaxations with increasing content of PANi to over 15.6wt%, which is ascribed to a cooperative consequence of the core/shell interfaces and the dielectric PANi shells. Additionally, the permeability presents a strong natural resonance around 2–8GHz, which is dominant among microwave magnetic loss. The proper matching of the permittivity and the permeability contributes to enhanced microwave absorption.

The purpose of this study was to investigate the role of pore size on tissue ingrowth and neovascularization in porous bioceramics under the accurate control of the pore parameters. For that purpose, β-tricalcium phosphate (β-TCP) cylinders with four different macropore sizes (300-400, 400-500, 500-600 and 600-700 µm) but the same interconnection size (120 µm) and unchangeable porosity were implanted into fascia lumbodorsalis in rabbits. The fibrous tissues and blood vessels formed in scaffolds were observed histologically and histomorphometrically. The vascularization of the porous bioceramics was analyzed by single-photon emission computed tomography (SPECT). It is found that pore size as an important parameter of a porous structure plays an important role in tissue infiltration into porous biomaterial scaffolds. The amount of fibrous tissue ingrowth increases with the decrease of the pore size. In four kinds of scaffolds with different macropore sizes (300-400, 400-500, 500-600 and 600-700 µm) and a constant interconnection size of 120 µm, the areas of fibrous tissue (%) were 60.5%, 52.2%, 41.3% and 37.3%, respectively, representing a significant decrease at 4 weeks (P < 0.01). The pore size of a scaffold is closely related to neovascularization of macroporous biomaterials implanted in vivo. A large pore size is beneficial for the growth of blood vessels, and the diameter of a pore smaller than 400 µm limits the growth of blood vessels and results in a smaller blood vessel diameter.

No abstract