No abstract

In this paper, drop impact onto a sphere is numerically investigated at moderate Reynolds and Weber numbers. It is naturally expected that the aspect ratio of the sphere to the drop, $\unicode[STIX]{x1D706}_{r}$, would make a big difference to drop spreading and retraction on the sphere, compared with drop impact onto a flat substrate. To quantitatively assess the effect of $\unicode[STIX]{x1D706}_{r}$, a diffuse-interface immersed-boundary method is adopted after being validated against experiments. With the help of numerical simulations, we identify the key regimes in the spreading and retraction, analyse the results by scaling laws, and quantitatively evaluate the effect of $\unicode[STIX]{x1D706}_{r}$ on the impact dynamics. We find that the thickness of the liquid film spreading on the sphere can be well approximated by $h_{L,\infty }(1+3/4\unicode[STIX]{x1D706}_{r}^{-3/2})$, where $h_{L,\infty }$ represents the film thickness of drop impact on a flat substrate. At the early stage of spreading, the temporal variation of the wetted area is independent of $\unicode[STIX]{x1D706}_{r}$ when the time is rescaled by the thickness of the liquid film. Drops are observed to retract on the sphere at a roughly constant speed, and the predictions of theoretical analysis are in good agreement with numerical results.

We numerically study the melting process of a solid layer heated from below such that a liquid melt layer develops underneath. The objective is to quantitatively describe and understand the emerging topography of the structures (characterized by the amplitude and wavelength), which evolve out of an initially smooth surface. By performing both two-dimensional (achieving Rayleigh number up to $Ra=10^{11}$ ) and three-dimensional (achieving Rayleigh number up to $Ra=10^9$ ) direct numerical simulations with an advanced finite difference solver coupled to the phase-field method, we show how the interface roughness is spontaneously generated by thermal convection. With increasing height of the melt the convective flow intensifies and eventually even becomes turbulent. As a consequence, the interface becomes rougher but is still coupled to the flow topology. The emerging structure of the interface coincides with the regions of rising hot plumes and descending cold plumes. We find that the roughness amplitude scales with the mean height of the liquid layer. We derive this scaling relation from the Stefan boundary condition and relate it to the non-uniform distribution of heat flux at the interface. For two-dimensional cases, we further quantify the horizontal length scale of the morphology, based on the theoretical upper and lower bounds given for the size of convective cells known from Wang et al. (Phys. Rev. Lett., vol. 125, 2020, 074501). These bounds agree with our simulation results. Our findings highlight the key connection between the morphology of the melting solid and the convective flow structures in the melt beneath.

We numerically investigate the mechanism leading to the entrapment of spheres at the gas–liquid interface after impact. Upon impact onto a liquid pool, a hydrophobic sphere is seen to follow one of the three regimes identified in the experiment (Lee & Kim, Langmuir, vol. 24, 2008, pp. 142–145): sinking, bouncing or being entrapped at the interface. It is important to understand the role of wettability in this process of flow–structure interaction with dynamic wetting, and in particular, to what extent the wettability can determine whether the sphere is entrapped at the interface. For this purpose, a diffuse-interface immersed boundary method is adopted in the numerical simulations. We expand the parameter space considered previously, provide the phase diagrams and identify the key phenomena in the impact dynamics. Then, we propose the scaling models to interpret the critical conditions for the occurrence of sphere entrapment, accounting for the wettability of the sphere. The models are shown to provide a good correlation among the impact inertia of the drop, the surface tension, the wettability and the density ratio of the sphere to the liquid.

We numerically study the impact of a compound drop on a hydrophobic substrate using a ternary-fluid diffuse-interface method, aiming to understand how the presence of the inner droplet affects the spreading dynamics and maximal spreading of the compound drop. First, it is interesting to see that the numerical results for an impacting pure drop agree well with the universal rescaling of maximal spreading ratio proposed by Lee et al. (J. Fluid Mech., vol. 786, 2016, R4). Second, two flow regimes have been identified for an impacting compound drop: namely jammed spreading and joint rim formation. The maximal spreading ratio of the compound drop is found to depend on the volume fraction of the inner droplet $\unicode[STIX]{x1D6FC}$, the surface tension ratio $\unicode[STIX]{x1D6FE}$, the Weber number and the flow regime. Moreover, we propose a universal rescaling of maximal spreading ratio for compound drops, by integrating the one for pure drops with a corrected Weber number that takes $\unicode[STIX]{x1D6FC}$, $\unicode[STIX]{x1D6FE}$ and the flow regime into account. The predictions of the universal rescaling are in good agreement with the numerical results for impacting compound drops.