Silicon germanium (SiGe) alloys hold promise for thermoelectric power generation at high temperatures and have been applied in deep-space missions. However, enhancement of the dimensionless thermoelectric figure-of-merit (ZT) is still needed for practical civil applications of SiGe. In this work, we report high-performance oxide/SiGe bulk composites that were obtained via hot-press sintering of mixed powders composed of phosphorus (P)-doped SiGe prepared via mechanical alloying, using a ball-milling technique and La−Nb-doped SrTiO 3 (La−Nb−STO). The La− Nb−STO powder was obtained from ball milling of a bulk La−Nb−STO sample that was sintered via hot pressing of hydrothermally synthesized La−Nb−STO powder. Controlling the amount of La−Nb−STO nanoparticles added to SiGe matrix increased the power factor by optimizing the electron concentration and mobility in the composite. In addition, compared with single-phase P-doped SiGe, the second phase decreased the thermal conductivity because of additional phonon scattering at the interface. As a result, a high ZT of 0.91 was realized in the n-type oxide/SiGe bulk composite at 1000 K, which was 18% larger than that for the typical materials used in space flight missions and 5% higher than the single-phase SiGe alloys obtained in the present study. The strategy used in this study could also be viable to further enhance the ZT of nanostructured n-type SiGe and SrTiO 3 -based oxide materials.

Strontium titanate ([Formula: see text] has the advantages of being non-toxic, environmentally friendly and high-temperature stable, and has potential application in waste heat power generation at medium and high temperature. To explore the impact of TiO2 on the thermoelectric properties of SrTiO3, we synthesized TiO2/La10Nbb10-STO composite powders by hydrothermal method using precursor solution of 10[Formula: see text]mol.% La and 10[Formula: see text]mol.% Nb co-doped STO (La10Nb10-STO) containing TiO2 nanopowders with different molar ratio. After cold pressing and sintering, composite bulk materials were obtained, and their microstructure and thermoelectric transport properties were analyzed. With the increasing TiO2, although the thermal conductivity of TiO2/La10Nb10-STO composite decreased and the Seebeck coefficient increased, the minimum thermal conductivity and the maximum Seebeck coefficient were 2.54[Formula: see text][Formula: see text][Formula: see text] and 215[Formula: see text][Formula: see text]V[Formula: see text][Formula: see text], respectively, at 1000[Formula: see text]K, but the power factor decreased at high temperature due to the apparent decrease of electrical conductivity, resulting in the ZT values being lower than that of La0Nb10-STO without TiO2 addition at high temperature. Significantly, the addition of TiO2 can improve the thermoelectric performance of strontium titanate at low temperature. This approach is expected to improve the ZT of SrTiO3-based thermoelectric material through additional controlling of electrical conductivity.

No abstract