In this study, the aim was to compare experimental and empirical methods used for estimation the soil water retention under different soil conditions. Soil samples were chosen to represent examples of heavy, medium and light soil structures. Water retention curves were obtained in the laboratory using the standard method. The van Genuchten (1980) (vG), and the Brooks and Corey (1964) (BC) methods were used empirically. Model parameters were determined by artificial neural networks and Solver optimization methods. In addition, soil water retention SWR curves were obtained by using a piecewise regression (PR) method. As a result of the study, determination coefficient R2 values from 0.8946 to 0.9879 were obtained for the vG model, while the Solver method gave better results. R2 values from 0.8914 to 0.9267 were obtained for the BC method and finally from 0.9598 to 0.9717 for the PR method. No clear differences were observed for different soil structures. Finally, the use of PR has been suggested for water retention curves where breakpoints are to be included, and it is also easy to use. In addition, the vG and BC models gave reasonable results for different soil groups. It is understood that the Rosetta method provided with the HYDRUS software program can be used in the case of limited data to determine model parameters. However, the Solver method provided more reliable results and was easy to use with both models.

Jüt bitkisi kozmetik, parfümeri, gıda ve ilaç gibi endüstrilerde kullanılan en önemli şifalı bitkilerden biridir. Bu çalışma 2019 yılında Jüt (Corchorus capsularis, Corchorus olitorius) türlerinin üretimi için gerçekleştirilmiş olup, bu türler Türkiye Bingöl'de üretilmiştir. Denemede 50 cm sıra aralığı ve 10 cm sıra üzeri uygulanmıştır. Her sıraya damla sulama sistemi kurulmuş ve bu sistemle kontrollü bir şekilde sulama yapılmıştır. Corchorus olitorius tohum üretti, ancak Corchorus capsularis tohum üretmemiştir. Her iki türdeki yaprak ve gövdelerin kimyasal bileşimleri GC-MS ile analiz edilmiş, GC-MS sonuçlarına göre Corchorus olitorius ve Corchorus capsularis türlerinin yaprak kısımlarında toplam 18 ve 20 bileşen tespit edilmiştir; Corchorus olitorius ve Corchorus capsularis türlerinin gövdelerinde sırasıyla toplam 11 ve 29 bileşen tespit edilmiştir. Yapraklarda ve gövdelerde literatür verilerinden farklı bileşenler tespit edilmiştir.