No abstract

No abstract

Bioactive glasses (BaG) can bind to human bone tissues and have been used in many biomedical applications for the last 30 years. However they usually are weak and brittle. On the other hand, composites that combine polymers and BaG are of particular interest, since they often show an excellent balance between stiffness and toughness. Bioactive glass-poly(vinyl alcohol) foams to be used in tissue engineering applications were previously developed by our group, using the sol-gel route. Since bioactive glass-polymer composite derived from the sol-gel process cannot be submitted to thermal treatments at high temperatures (above 400 degrees C), they usually have unreacted species that can cause cytotoxicity. This work reports a technique for stabilizing the sol-gel derived bioactive glass/poly(vinyl alcohol) hybrids by using glutaraldehyde (GA), NH(4)OH solutions and a blocking solution containing bovine serum albumin. PVA/BaG/GA hybrids were characterized by Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM/EDX) analyses. Moreover, MTT (3-[4,5-dimethylthiazole-2-yl]-2,5-diphenyltetrazolium bromide) biocompatibility and cytotoxicity assays were also conducted. The hybrids exhibited pore size varying from 80 to 820 mum. After treatments, no major changes in the pore structure were observed and high levels of cell viability were obtained.

The synthesis, characterization, preliminary cytocompatibility, and degradation behavior of the hybrids based on 70% Poly(vinyl alcohol) and 30% bioactive glass (58SiO2–33CaO–9P2O5, BaG) with macroporous tridimensional structure is reported for the first time. The effect of glutaraldehyde covalent crosslinker in the organic-inorganic nanostructures produced and, as a consequence, tailoring the hybrids properties was investigated. The PVA/BaG hybrids scaffolds are characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray Microcomputed tomography analysis (μCT). Cytotoxicity assessment is performed by the MTT method with VERO cell culture. Additionally, the hybridin vitrodegradation assay is conducted by measuring the mass loss by soaking in deionized water at 37°C for up to 21 days. The results have clearly shown that it is possible to modify the PVA/BaG hybrids properties and degradation behavior by engineering the structure using different concentrations of the chemical crosslinker. Moreover, these hybrid crosslinked nanostructures have presented 3D hierarchical pore size architecture varying within 10–450 μm and a suitable cytocompatibility for potential use in bone tissue engineering applications.

Tissue engineering has evolved from the use of biomaterials for bone substitution that fulfill the clinical demands of biocompatibility, biodegradability, non-immunogeneity, structural strength and porosity. Porous scaffolds have been developed in many forms and materials, but few reached the need of adequate physical, biological and mechanical properties. In the present paper we report the preparation of hybrid porous polyvinyl alcohol (PVA)/bioactive glass through the sol-gel route, using partially and fully hydrolyzed polyvinyl alcohol, and perform structural characterization. Hybrids containing PVA and bioactive glass with composition 58SiO2-33CaO-9P2O5 were synthesized by foaming a mixture of polymer solution and bioactive glass sol-gel precursor solution. Sol-gel solution was prepared from mixing tetraethoxysilane (TEOS), triethylphosphate (TEP), and calcium chloride as chemical precursors. The hybrid composites obtained after aging and drying at low temperature were chemically and morphologically characterized through infrared spectroscopy and scanning electron microscopy. The degree of hydrolysis of PVA, concentration of PVA solution and different PVA-bioglass composition ratios affect the synthesis procedure. Synthesis parameters must be very well combined in order to allow foaming and gelation. The hybrid scaffolds obtained exhibited macroporous structure with pore size varying from 50 to 600 µm