Kota Baru is the satellite city of Bandar Lampung. The city is prepared for the expansion of the city of Bandar Lampung. Zonation map of earthquake risk is required for Kota Baru due to its location within the reach of earthquake energy of Semangko subduction fault. In this study, we model the earthquake-prone zone map based on the soil characteristics (site effect) combined with the underground layer model to get a detailed description of the horizontal and vertical soil character. The microtremor method is performed to obtain the zonation effect mapping. Whereas, the ground layer modeling is obtained using the geoelectrical method. The modeling results show that the study area is far from tectonic activity based on the history of past earthquake events. However, this area has a large sediment thickness and has a low dominant frequency value, so it is an area that is vulnerable to earthquakes

Cooler is an electronic device used to cool food and drinks. The current cooling system still uses refrigerants that can damage the ozone layer. The thermoelectric based cooling system can be used as an alternative since it produces sufficient temperature difference on both sides by considering its advantages that is more environmentally friendly. This research is aimed to design and built a cooling and heating system using a thermoelectric Peltier TEC 12715 based on microcontroller Arduino uno. This system uses the Peltier thermoelectric effects as coolant and warmer because it produces temperature difference on both sides. Based on this research, in the no load condition the system can produce a cold temperature of 21,3 ℃ and a hot temperature of 80,2 ℃ in the 40th minute of use. When given a load of 300 ml and 220 ml drink bottles, the system can produce a cold temperature of 22,2 ℃ and a hot temperature of 70,7 ℃ in the 40th minute of use. The TEC 12715 Peltier component used in this research produces the optimal temperature if a voltage of 12 volts and a current of 15 amperes are applied to each Peltier component. The designed system is able to operate repeatedly, properly, and continuously since it is directly connected to alternative current power which is common in households.