No abstract

No abstract

The all‐inorganic nature of CsPbI3 perovskites allows to enhance stability in perovskite devices. Research efforts have led to improved stability of the black phase in CsPbI3 films; however, these strategies—including strain and doping—are based on organic‐ligand‐capped perovskites, which prevent perovskites from forming the close‐packed quantum dot (QD) solids necessary to achieve high charge and thermal transport. We developed an inorganic ligand exchange that leads to CsPbI3 QD films with superior phase stability and increased thermal transport. The atomic‐ligand‐exchanged QD films, once mechanically coupled, exhibit improved phase stability, and we link this to distributing strain across the film. Operando measurements of the temperature of the LEDs indicate that KI‐exchanged QD films exhibit increased thermal transport compared to controls that rely on organic ligands. The LEDs exhibit a maximum EQE of 23 % with an electroluminescence emission centered at 640 nm (FWHM: ≈31 nm). These red LEDs provide an operating half‐lifetime of 10 h (luminance of 200 cd m−2) and an operating stability that is 6× higher than that of control devices.

Cesium lead halide (CsPbX, X = Cl, Br, or I) perovskite quantum dots (QDs) are known as ionic nanocrystals, and their optical properties are greatly affected by the washing solvent used during the purification process. Here, we demonstrate the purification process of CsPbBr perovskite QDs using low-dielectric-constant solvents to completely remove impurities, such as the reaction solvent and desorbed ligands. The use of the ether solvent diethylene glycol dimethyl ether (diglyme), having a low dielectric constant of ε = 7.23, as a poor solvent for reprecipitation allowed for multiple wash cycles, which led to high purity and high photoluminescence quantum yield for CsPbBr QDs. The light-emitting device constructed with the CsPbBr QDs and washed twice with diglyme (two-wash) showed a low turn-on voltage of 2.7 V and a peak external quantum efficiency of over 8%. Thus, the purification of perovskite QDs with multiple wash cycles using a low-dielectric-constant solvent is an effective approach for enhancing not only the optical properties but also the efficiency of perovskite quantum dot light-emitting devices.

Metal halide perovskites have emerged as promising candidates for solution-processed blue light-emitting diodes (LEDs). However, halide phase segregationand the resultant spectral shiftat LED operating voltages hinders their application. Here we report true-blue LEDs employing quasi-two-dimensional cesium lead bromide with a narrow size distribution of quantum wells, achieved through the incorporation of a chelating additive. Ultrafast transient absorption spectroscopy measurements reveal that the chelating agent helps to control the quantum well thickness distribution. Density functional theory calculations show that the chelating molecule destabilizes the lead species on the quantum well surface and that this in turn suppresses the growth of thicker quantum wells. Treatment with γ-aminobutyric acid passivates electronic traps and enables films to withstand 100°C for 24 h without changes to their emission spectrum. LEDs incorporating γ-aminobutyric acid-treated perovskites exhibit blue emission with Commission Internationale de l'Éclairage coordinates of (0.12, 0.14) at an external quantum efficiency of 6.3%.