A robust, superamphiphobic fabric with a novel self‐healing ability to autorepair from chemical damage is prepared by a two‐step wet‐chemistry coating technique using an easily available material system consisting of poly(vinylidene fluoride‐co‐hexafluoropropylene), fluoroalkyl silane, and modified silica nanoparticles. The coated fabrics can withstand at least 600 cycles of standard laundry and 8000 cycles of abrasion without apparently changing the superamphiphobicity. The coating is also very stable to strong acid/base, ozone, and boiling treatments. After being damaged chemically, the coating can restore its super liquid‐repellent properties by a short‐time heating treatment or room temperature ageing. This simple but novel and effective coating system may be useful for the development of robust protective clothing for various applications.

Herein, we demonstrate that a flexible, air-permeable, thermoelectric (TE) power generator can be prepared by applying a TE polymer (e.g. poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate)) coated commercial fabric and subsequently by linking the coated strips with a conductive connection (e.g. using fine metal wires). The poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) coated fabric shows very stable TE properties from 300 K to 390 K. The fabric device can generate a TE voltage output (V) of 4.3 mV at a temperature difference (ΔT) of 75.2 K. The potential for using fabric TE devices to harvest body temperature energy has been discussed. Fabric-based TE devices may be useful for the development of new power generating clothing and self-powered wearable electronics.

Existing coating systems for preparing superamphiphobic surfaces are predominantly confined into small-scale uses due to the heavy use of organic solvents. Waterborne coating treatment is highly desirable for the high safety, low cost, and non-environmental impact, but remains difficult to develop due to the problems in forming durable, homogeneous coating from an aqueous dispersion of amphiphobic substances. In this study, we have proved that lyophobic nanoparticles, fluorinated alkyl silane (FAS), and fluorocarbon surfactant can form a stable dispersion in water, suitable for preparing durable superamphiphobic surfaces on various solid This article is protected by copyright. All rights reserved. 2 substrates. A series of substrates including fabrics, sponge, wood, glass, and metal, after being coated with this ternary coating system show superamphiphobicity with low contact angle hysteresis. The coating is durable enough against physical abrasion, repeated washing, boiling in water, and strong acid/base attacks. Benefiting from FAS, the coating also has a self-healing ability against both physical and chemical damages. The unexpected stability of the ternary dispersion is a result of the synergistic interaction of the three ingredients. Results from this study may promote the wide development of safe, and cost-efficient superamphiphobic techniques for diverse applications.Received: ((will be filled in by the editorial staff))Revised: ((will be filled in by the editorial staff)) Published online: ((will be filled in by the editorial staff))

Electrospun PVDF nanofibers with uniform fiber-morphology, smaller diameter and higher β crystal phase content show higher mechanical-to-electric energy conversion ability.

Directional fluid motion driven by the surface property of solid substrate is highly desirable for manipulating microfluidic liquid and collecting water from humid air. Studies on such liquid motion have been confined to dense material surfaces such as flat panels and single filaments. Recently, directional fluid transport through the thickness of thin porous materials has been reported by several research groups. Their studies not only attract fundamental, experimental and theoretical interest but also open novel application opportunities. This review article summarizes research progress in directional fluid transport across thin porous materials. It focuses on the materials preparation, basic properties associated with directional fluid transport in thin porous media, and their application development. The porous substrates, type of transporting fluids, structure-property attributes, and possible directional fluid transport mechanism are discussed. A perspective for future development in this field is proposed.