Ba(Mg1/3Ta2/3)O3 (BMT) has a high melting point and is envisioned as a thermal barrier coating material. In this study, a hybrid suspension/solution precursor plasma spray process with a radio frequency thermal plasma torch is designed to deposit BMT nanostructured coatings. Six combinations of chemical reagents are investigated as coating precursors: one BMT powder suspension and five Ta2O5 suspensions in nitrate-or acetate-based solutions. X-ray photoelectron spectroscopy (XPS) is used to evaluate the element evaporation during plasma spraying, while a thermogravimetric / differential thermal analysis (TG/DTA) is applied to investigate the BMT formation.Parameters such as precursor chemistry, plasma power, spraying distance and substrate preheating are studied with regards to the coating phase structure. Twice the Mg stoichiometric amount with a power of 50 kW shows the best results when using nanocrystallized Ta2O5 as a tantalum precursor. When choosing nitrates as Ba and Mg precursors, crystallized BMT is obtained at lower plasma power (45 kW) when compared to acetates (50 kW). BaTa2O6, Ba3Ta5O15, Ba4Ta2O9, Mg4Ta2O9 are the main secondary phases observed during the BMT coatings deposition. Because of the complicated acetate decomposition process, the coating deposition rate from nitrate precursors is 1.56 times higher than that from acetate precursors.

No abstract

No abstract