As one of the most important field-responsive intelligent and smart soft matter materials, magnetorheological (MR) fluids, consisting of magneto-responsive magnetizable particles suspended in non-magnetic fluids, have drawn a lot of attentions in both academia and industry as their physical and rheological characteristics can be controlled with external magnetic field strength. In this highlight, preparation methods and MR properties of various magnetic composites with soft magnetic particles and polymers are reviewed. In addition, some industrial applications, such as a MR dampers and a MR polishing, are briefly summarized.

A series of poly(ethylene oxide) (PEO)/organoclay nanocomposites have been prepared via a solvent casting method. Using three different organoclays modified with the alkylammonium salts, the effect of surfactants on organoclay surfaces in polymer/organoclay nanocomposites was investigated by focusing on two major aspects:  internal structure analysis and rheological measurement of the nanocomposites. The d spacings of both the pure PEO and intercalated organoclay were examined via X-ray diffraction analysis, and the microstructure of these nanocomposites was examined by transmission electron microscopy. Rheological properties of these nanocomposites exhibited different behavior with different modifier concentrations and surfactant sizes (chain lengths). To analyze the non-Newtonian flow behavior, we fitted shear viscosity data via the Carreau model, showing that steady shear viscosity and power-law behavior increase with organoclay content. Hysteresis phenomenon was also enhanced with organoclay content, and the increase in the storage/loss moduli and interactions among organoclay platelets were observed with organoclay content. The enhanced thermal stability of the nanocomposites by organoclay was also observed.

We prepared poly(vinylidene fluoride) (PVDF)/multiwalled carbon nanotube (MWCNT) nanocomposites using the electrospinning process and investigated the effects of varying the MWCNT content, as well as the additional use of drawing and poling on the polymorphic behavior and electroactive (piezoelectric) properties of the membranes obtained. Fourier transform infrared spectroscopy and wide-angle X-ray diffraction revealed that dramatic changes occurred in the β-phase crystal formation with the MWCNT loading. This was attributed to the nucleation effects of the MWCNTs as well as the intense stretching of the PVDF jets in the electrospinning process. The remanent polarization and piezoelectric response increased with the amount of MWCNTs and piezoelectric β-phase crystals. A further mechanical stretching and electric poling process induced not only highly oriented β-phase crystallites, but also very good ferroelectric and piezoelectric performances. In the drawn samples, the interfacial interaction between the functional groups on the MWCNTs and the CF 2 dipole of PVDF chains produced a large amount of βphase content. In the poled samples, the incorporation of the MWCNTs made it easy to obtain efficient charge accumulation in the PVDF matrix, resulting in the conversion of the α-phase into the β-phase as well as the enhancement of remanent polarization and mechanical displacement.

No abstract