Materials with good flexibility and high conductivity that can provide electromagnetic interference (EMI) shielding with minimal thickness are highly desirable, especially if they can be easily processed into films. Two-dimensional metal carbides and nitrides, known as MXenes, combine metallic conductivity and hydrophilic surfaces. Here, we demonstrate the potential of several MXenes and their polymer composites for EMI shielding. A 45-micrometer-thick Ti3C2Tx film exhibited EMI shielding effectiveness of 92 decibels (>50 decibels for a 2.5-micrometer film), which is the highest among synthetic materials of comparable thickness produced to date. This performance originates from the excellent electrical conductivity of Ti3C2Tx films (4600 Siemens per centimeter) and multiple internal reflections from Ti3C2Tx flakes in free-standing films. The mechanical flexibility and easy coating capability offered by MXenes and their composites enable them to shield surfaces of any shape while providing high EMI shielding efficiency.

In order to get poly(vinylidene fluoride) (PVDF) films containing high beta-phase content, multiwalled carbon nanotubes (MWCNTs) were blended with PVDF. For drawn samples, the content of piezoelectric beta-form crystal was increased with MWCNT addition due to the rapid crystallization rate offered by the nucleating action of MWCNT, but soon reached a plateau. Poling on the drawn samples helps additional beta-phase formation when the added MWCNT content was less than 0.2 wt%; at this MWCNT amount, almost pure beta-phase crystal was obtained. More MWCNT addition induced depolarization to reduce the beta-phase content. Undrawn samples show monotonous increase of beta-phase content with MWCNT amount when subjected to poling.

Fractal dimension (FD) has been widely used to provide a quantitative description of structural complexity in the cerebral cortex. FD is an extremely compact measure of shape complexity, condensing all details into a single numeric value. We interpreted the variation of the FD in the cortical surface of normal controls through multiple regression analysis with cortical thickness, sulcal depth, and folding area related to cortical complexity. We used a cortical surface showing a reliable representation of folded gyri and manually parcellated it into frontal, parietal, temporal, and occipital regions for regional analysis. In both hemispheres the mean cortical thickness and folding area showed significant combination effects on cortical complexity and accounted for about 50% of its variance. The folding area was significant in accounting for the FD of the cortical surface, with positive coefficients in both hemispheres and several lobe regions, while sulcal depth was significant only in the left temporal region. The results may suggest that human cortex develops a complex structure through the thinning of cortical thickness and by increasing the frequency of folds and the convolution of gyral shape rather than by deepening sulcal regions. Through correlation analysis of FD with IQ and the number of years of education, the results showed that a complex shape of the cortical surface has a significant relationship with intelligence and education. Our findings may indicate the structural characteristics that are revealed in the cerebral cortex when the FD in human brain is increased, and provide important information about brain development.

No abstract

We prepared poly(vinylidene fluoride) (PVDF)/multiwalled carbon nanotube (MWCNT) nanocomposites using the electrospinning process and investigated the effects of varying the MWCNT content, as well as the additional use of drawing and poling on the polymorphic behavior and electroactive (piezoelectric) properties of the membranes obtained. Fourier transform infrared spectroscopy and wide-angle X-ray diffraction revealed that dramatic changes occurred in the β-phase crystal formation with the MWCNT loading. This was attributed to the nucleation effects of the MWCNTs as well as the intense stretching of the PVDF jets in the electrospinning process. The remanent polarization and piezoelectric response increased with the amount of MWCNTs and piezoelectric β-phase crystals. A further mechanical stretching and electric poling process induced not only highly oriented β-phase crystallites, but also very good ferroelectric and piezoelectric performances. In the drawn samples, the interfacial interaction between the functional groups on the MWCNTs and the CF 2 dipole of PVDF chains produced a large amount of βphase content. In the poled samples, the incorporation of the MWCNTs made it easy to obtain efficient charge accumulation in the PVDF matrix, resulting in the conversion of the α-phase into the β-phase as well as the enhancement of remanent polarization and mechanical displacement.