This study attempted to review the chemical composition of 25 samples of Sangpyeongtongbo having different manufacturing place and period, and then to find the manufacturing method. As a result of chemical composition analysis of Sangpyeongtongbo, main components include Cu, Zn and Pb, and some samples contained Sn and Fe. But, the chemical composition of each Sangpyeongtongbo varied with big differences. When the main content change was examined, Cu and Sn became decreased at the later period, and Zn and Pb had higher contents. The difference in the ingredient content had close relation for the profit of Sangpyeongtongbo. When refined microstructure was observed, 25 kinds of Sangpyeongtongbo had developed different types of microstructure such as dendrite, large grain and grain refinement. But, 25 kinds of Sangpyeongtongbo had no heat treatment processing. And, the types of microstructure were difference, which seems because different microstructure was developed due to the difference of Sn and Fe and cooling speed in Sangpyeongtongbo.

To investigate ancient glass fragments, voltammetric analysis of trace cobalt (Co) was conducted using modified carbon nanotube sensors in cyclic voltammetry (CV), square wave (SW) stripping voltammetry, and chronoamperometry modes. Optimum SW conditions were obtained at working ranges of 40-460 ug/l Co (8 points), and a standard deviation of 0.2881% (n = 15) was observed at 20.0 ug/l Co ion at 100 s accumulation time. An analytical detection limit of 12.0 ug/l was likewise obtained. The results were applied to an ancient tomb glass dated 17th AD (ca. Joseon period; recently found in Sachang Dong, Cheongju City, South Korea). It was found that the sensor can be used in trace analysis of archeological materials.

Seungja Chongtong is a small korean tubular arm that made by particular arm-making way imitating a chinese arm. This study organizes scientific analysis results with results of inscriptions reading of Seungja Chongtong in the Central museum of Kyunghee University. Three of Seungja Chongtongs are made with Cu-Sn-Pb ternary alloy which is not much differ in contents and the results of microstructure analysis of Seungja Chongtong 1 which could investigate a microstructure among the Chongtongs were found out that Seungja Chongtong is made by general casting, with no evidences of an additional heat-treatment and tempering. Furthermore, in results of lead isotope ratio analysis to find out a source of lead using during the production of Seungja Chongtong, It seems that Seungja Chongtong is made with a lead ore from northern Gyeongsangbuk-do Province and southern Gangwon-do Province called Korea southern zone 2 area.

From Neungsalli Temple located in Buyeo, ancient glass vessel fragments were discovered along with hundreds of glass beads. In this research, we used SEM-EDS to analyze glass vessel fragments and beads excavated from Neungsalli Temple. Then, we analyzed their chemical composition and examined their characteristics. In particular, we investigated a relationship between glass vessels from Neungsalli temple and Hwangnamdaechong (South tomb). The result of our experiment showed that the glass artifacts from Neungsalli temple were all soda glass. To be specific, the vessel fragments were soda-lime glass and spherical beads were high-alumina soda glass. Then, we compared glass vessel fragments from Neungsalli temple to glass vessels excavated from Hwangnamdaechong. Glass vessels from both sites turned out to be soda lime glass. We classified them further based on raw material used for soda -natron and marine plant ash.