No abstract

A 6-bit, 7 mW, 700 MS/s subranging ADC using Capacitive DAC (CDAC) and gate-weighted interpolation fabricated in 90 nm CMOS technology is demonstrated. CDACs are used as a reference selection circuit instead of resistive DACs (RDAC) for reducing settling time and power dissipation. A gate-weighted interpolation scheme is also incorporated to the comparators, to reduce the circuit components, power dissipation and mismatch of conversion stages. By virtue of recent technology scaling, an interpolation can be realized in the saturation region with small error. A digital offset calibration technique using capacitor reduces comparator's offset voltage from 10 mV to 1.5 mV per sigma. Experimental results show that the proposed ADC achieves a SNDR of 34 dB with calibration and FoM is 250 fJ/conv., which is very attractive as an embedded IP for low power SoCs.

This paper describes the design of an interpolated pipeline analog-to-digital converter (ADC). By introducing the interpolation technique into the conventional pipeline topology, it becomes possible to realize a more than 10-bits resolution and several hundred MS/s ADC using low-gain open-loop amplifiers without any multiplying digital-to-analog converter (MDAC) calibration. In this paper, linearity requirement of the amplifier is analyzed with the relation of reference range and stage resolution first. Noise characteristic is also discussed with amplifier's noise bandwidth and load capacitance. After that, sampling speed and SNR characteristic are examined with various amplifier currents. Next, the resolution optimization of the pipeline stage is discussed based on the power consumption. Through the analysis, reasonable parameters for the amplifier can be defined, such as transconductance, source degeneration resistance and load capacitance. Also, optimized operating speed and stage resolution for interpolated pipelined ADC is shown. The analysis in this paper is valuable to both the design of interpolated pipeline ADCs and other circuits which incorporate interpolation and amplifiers.

No abstract

No abstract