No abstract

Transformation Induced Plasticity and Twinning Induced Plasticity (TWIP) titanium alloys are well-known to display a good combination of strain-hardenability and ductility. However, a large range of strain-hardening rates, which cannot be predicted by the actual design method based on electronic parameters, is obtained. In order to explain this wide range of properties, two different alloys displaying a large difference of strain-hardening rates, but similar chemical stability, have been studied and compared: Ti-12Mo and Ti-8.5Cr-1.5Sn (in wt%). Evolution of both twin size and density during in situ tensile tests has been followed by SEM/electron backscatter diffraction mapping, and two distinct behaviors can be highlighted: the growth of existing twins (Ti-12Mo) and the nucleation of new twins (Ti-8.5Cr-1.5Sn) upon loading. The last one may lead to an improvement of the dynamic Hall-Petch effect by multiplication of twin/matrix interfaces, with subsequent improvement of the macroscopic strain-hardening. It is thought that this competition may be related to the crystal lattice distortion induced by the alloying elements and the subsequent reduction of the migration velocity of the twin/matrix interfaces. Impact Statement: This work reports on distinct behaviors of mechanical twins in TRIP/TWIP titanium alloys, highlighting for the first time a competition between growth of existing twins and nucleation of additional twins upon loading. This effect is assumed to be due to the solute-strengthening effect in the studied alloys and modify, as a consequence, the strain-hardenability of the TRIP/TWIP alloys.

Abstract. Fragmentation of α lamellae and subsequent spheroidization of α laths in α/β titanium alloys occurring during and after deformation are well known phenomena. We will illustrate the development of a new finite element methodology to model them. This new methodology is based on a level set framework to model the deformation and the ad hoc simultaneous and/or subsequent interfaces kinetics. We will focus, at yet, on the modeling of the surface diffusion at the α/β phase interfaces and the motion by mean curvature at the α/α grain interfaces.

Abstract. Fragmentation of α lamellae and subsequent spheroidization of α laths in α/β titanium alloys occurring during and after deformation are well known phenomena. We will illustrate the development of a new finite element methodology to model them. This new methodology is based on a level set framework to model the deformation and the ad hoc simultaneous and/or subsequent interfaces kinetics. We will focus, at yet, on the modeling of the surface diffusion at the α/β phase interfaces and the motion by mean curvature at the α/α grain interfaces.

A new Ti-Cr based alloy has been developed to reach a TWIP (TWinning Induced Plasticity) effect as the main deformation mechanism. This new composition, involving Fe addition, was derived from a classical TRIP/TWIP alloy Ti-8.5Cr-1.5Al (wt%) (TCA). The main objective is to achieve an optimized strength/hardenability combination by limiting the TRIP (TRansformation Induced Plasticity) effect whose critical resolved shear stress lowers the plasticity threshold. This new alloy Ti-7Cr-1Al-xFe (wt%) (TCAF) displays excellent mechanical properties, with an increased yield strength (with respect to TCA alloy), a very high work-hardening rate and an extremely high fracture strength (UTS=1415MPa), while maintaining an excellent ductility (ε=0.38 at fracture). Both mechanical (tensile tests) and microstructural characterization at different scales (EBSD, XRD) have been performed, evidencing a dense network of fine {332}<113> mechanical twins as well as the presence of stress-induced martensite plates at twins intersections, as a secondary mechanism.