No abstract

The exposure of ATG graphite sample to DIII-D divertor plasma was provided by the DiMES ( Divertor Material Evaluation System) mechanism. The graphite sample arranged to receive the parallel heat flux on a small region of the surface was exposed to 600ms of outer strike point plasma. The sample was constructed to collect the eroded material directed downward into a trapping zone onto s Si disk collector. The average heat flux onto the graphite sample during the exposure was about 200W/cm2, and the parallel heat flux was about 10 KW/cm2. After the exposure the graphite sample and Si collector disk were analyzed using SEM, NRA, RBS, Auger spectroscopy, IR and Raman spectroscopy. The thermal desorption was studied also. The deposited coating on graphite sample is amorphous carbon layer. Just upstream of the high heat flux zone the -redeposition layer has a globular structure. The deposition layer on Si disk is composed also from carbon but has a diamond-like structure. The areal density of C and D in the deposited layer on Si disk varied in poloidal and toroidal directions. The maximum DIC areal density ratio is about 0.23, maximum carbon density is about 3.8*10'8cm-2, maximum D areal density is about 3*1017~m2. The thermal desorption spectrum had a peak at 1250K.

No abstract

No abstract

No abstract