Cyber-physical systems (CPSs) comprise a network of sensors and actuators that are integrated with a computing and communication core. Hydrobatic Autonomous Underwater Vehicles (AUVs) can be efficient and agile, offering new use cases in ocean production, environmental sensing and security. In this paper, a CPS concept for hydrobatic AUVs is validated in realworld field trials with the hydrobatic AUV SAM developed at the Swedish Maritime Robotics Center (SMaRC). We present system integration of hardware systems, software subsystems for mission planning using Neptus, mission execution using behavior trees, flight and trim control, navigation and dead reckoning. Together with the software systems, we show simulation environments in Simulink and Stonefish for virtual validation of the entire CPS. Extensive field validation of the different components of the CPS has been performed. Results of a field demonstration scenario involving the search and inspection of a submerged Mini Cooper using payload cameras on SAM in the Baltic Sea are presented. The full system including the mission planning interface, behavior tree, controllers, dead-reckoning and object detection algorithm is validated. The submerged target is successfully detected both in simulation and reality, and simulation tools show tight integration with target hardware.

Both higher efficiency and cost reduction can be gained from automating bathymetric surveying for offshore applications such as pipeline, telecommunication or power cables installation and inspection on the seabed. We present a SLAM system that optimizes the geo-referencing of bathymetry surveys by fusing the dead-reckoning sensor data from the surveying vehicle with constraints from the maximization of the geometric consistency of overlapping regions of the survey.The framework has been extensively tested on bathymetric maps from both simulation and several actual industrial surveys and has proved robustness over different types of terrain. We demonstrate that our system is able to maximize the consistency of the final map even when there are large sections of the survey with reduced topographic variation. The framework has been made publicly available together with the simulation environment used to test it and some of the datasets.

Registration methods for point clouds have become a key component of many SLAM systems on autonomous vehicles. However, an accurate estimate of the uncertainty of such registration is a key requirement to a consistent fusion of this kind of measurements in a SLAM filter. This estimate, which is normally given as a covariance in the transformation computed between point cloud reference frames, has been modelled following different approaches, among which the most accurate is considered to be the Monte Carlo method. However, a Monte Carlo approximation is cumbersome to use inside a time-critical application such as online SLAM. Efforts have been made to estimate this covariance via machine learning using carefully designed features to abstract the raw point clouds [1]. However, the performance of this approach is sensitive to the features chosen. We argue that it is possible to learn the features along with the covariance by working with the raw data and thus we propose a new approach based on PointNet [2]. In this work, we train this network using the KL divergence between the learned uncertainty distribution and one computed by the Monte Carlo method as the loss. We test the performance of the general model presented applying it to our target use-case of SLAM with an autonomous underwater vehicle (AUV) restricted to the 2-dimensional registration of 3D bathymetric point clouds.

With dead-reckoning from velocity sensors, AUVs may construct short-term, local bathymetry maps of the sea floor using multibeam sensors. However, the position estimate from dead-reckoning will include some drift that grows with time. In this work, we focus on longterm onboard storage of these local bathymetry maps, and the alignment of maps with respect to each other. We propose using Sparse Gaussian Processes for this purpose, and show that the representation has several advantages, including an intuitive alignment optimization, data compression, and sensor noise filtering. We demonstrate these three key capabilities on two real-world datasets.

No abstract