Background and aims Wastewater‐based epidemiology is an additional indicator of drug use that is gaining reliability to complement the current established panel of indicators. The aims of this study were to: (i) assess spatial and temporal trends of population‐normalized mass loads of benzoylecgonine, amphetamine, methamphetamine and 3,4‐methylenedioxymethamphetamine (MDMA) in raw wastewater over 7 years (2011–17); (ii) address overall drug use by estimating the average number of combined doses consumed per day in each city; and (iii) compare these with existing prevalence and seizure data. Design Analysis of daily raw wastewater composite samples collected over 1 week per year from 2011 to 2017. Setting and Participants Catchment areas of 143 wastewater treatment plants in 120 cities in 37 countries. Measurements Parent substances (amphetamine, methamphetamine and MDMA) and the metabolites of cocaine (benzoylecgonine) and of Δ9‐tetrahydrocannabinol (11‐nor‐9‐carboxy‐Δ9‐tetrahydrocannabinol) were measured in wastewater using liquid chromatography–tandem mass spectrometry. Daily mass loads (mg/day) were normalized to catchment population (mg/1000 people/day) and converted to the number of combined doses consumed per day. Spatial differences were assessed world‐wide, and temporal trends were discerned at European level by comparing 2011–13 drug loads versus 2014–17 loads. Findings Benzoylecgonine was the stimulant metabolite detected at higher loads in southern and western Europe, and amphetamine, MDMA and methamphetamine in East and North–Central Europe. In other continents, methamphetamine showed the highest levels in the United States and Australia and benzoylecgonine in South America. During the reporting period, benzoylecgonine loads increased in general across Europe, amphetamine and methamphetamine levels fluctuated and MDMA underwent an intermittent upsurge. Conclusions The analysis of wastewater to quantify drug loads provides near real‐time drug use estimates that globally correspond to prevalence and seizure data.

This contribution reviews the possibility of using the by-products from biodiesel production as substrates for anaerobic digestion and production of biogas. The process of biodiesel production is predominantly carried out by catalyzed transesterification. Besides desired methylesters, this reaction provides also few other products, including crude glycerol, oil-pressed cakes, and washing water. Crude glycerol or g-phase is heavier separate liquid phase, composed mainly by glycerol. A couple of studies have demonstrated the possibility of biogas production, using g-phase as a single substrate, and it has also shown a great potential as a cosubstrate by anaerobic treatment of different types of organic waste or energy crops. Oil cakes or oil meals are solid residues obtained after oil extraction from the seeds. Another possible by-product is the washing water from raw biodiesel purification, which is an oily and soapy liquid. All of these materials have been suggested as feasible substrates for anaerobic degradation, although some issues and inhibitory factors have to be considered.

The study summarises the energy consumption data obtained from the Slovak wastewater treatment plants. Overall, 51 large WWTPs using mesophilic anaerobic sludge digestion and biogas utilisation (the total capacity of 2.5 mil. p.e.) and 17 small rural WWTPs (the total capacity 15 000 p.e.) were compared in many technological and energy parameters. The average energy consumption in large WWTPs in Slovakia is 0.485 kWh/m 3 and 0.915 kWh/m 3 in small rural plants. The average energy demand related to BOD 5 load represents the value of 2.27 kWh/kg BOD 5 , in Slovak plants. The specific energy production is relatively low-in average 1.2 kWh el /m 3 of produced biogas and 0.1 kWh el /m 3 of treated wastewater, respectively. The average energy autarky in Slovak plants is 25.2%. Some plants have high energy autarky (>65%), despite no external biowastes being dosed to these during operation.

No abstract

No abstract