We analyzed C band and L band interferometric synthetic aperture radar (InSAR) data acquired from 2003 to 2011 to search for volcanic deformations at Llaima volcano, Southern Andes (38.69°S, 71.73°W). There, specific environmental conditions (steep slopes, snow‐ or ice‐capped summit, dense vegetation cover, and strong tropospheric artifacts) and limited amount of radar data available make it challenging to accurately measure ground surface displacement with InSAR. To overcome these difficulties, we first performed a careful analysis of the water vapor variations using Medium‐Resolution Imaging Spectrometer and Moderate Resolution Imaging Spectroradiometer near‐infrared water vapor products and then we inverted wrapped interferograms for both topographic correlated phase delays and a simple model source strength. In the light of our results, we conclude that there is no detectable ground displacement related to a deep magmatic source for the 2003–2011 period and that most of the fringes observed in the interferograms were produced by tropospheric delays.

No abstract

Currently, reduction of environmental effects of the cement industry is an issue of global interest and one of the alternatives is to replace clinker with additions such as volcanic powder. The purpose of this work is to study the influence of up to 400 hardening days of volcanic powder, obtained from the last eruption of the Calbuco volcano (Chile), on the pore structure, mechanical performance, and durability-related properties of mortars which incorporate up to 20% volcanic powder as a substitution for clinker. In addition, an evaluation of greenhouse gases emissions was performed in order to quantify the possible environmental benefits of incorporating the volcanic powder in the mortars. The results obtained indicated that mortars with contents of 10% and 20% of volcanic powder had adequate service properties and improved all durability-related properties overall as compared with those noted for ordinary Portland cement. Additionally, the use of up to 20% volcanic powder makes it possible to reduce the CO2 emissions of mortars by almost 20%, demonstrating the advantages of incorporating this addition in mortars.

No abstract