a b s t r a c tIf the 'Hydrogen Economy' is to progress, more hydrogen fuelling stations are required. In the short term and in the absence of a hydrogen distribution network, these fuelling stations will have to be supplied by liquid hydrogen (LH2) road tankers. Such a development will increase the number of tanker offloading operations significantly and these may need to be performed in close proximity to the general public.The aim of this work was to determine the hazards and severity of a realistic ignited spill of LH2 focussing on; flammability limits of an LH2 vapour cloud, flame speeds through an LH2 vapour cloud and subsequent radiative heat levels after ignition. The experimental findings presented are split into three phenomena; jet-fires in high and low wind conditions, 'burn-back' of ignited clouds and secondary explosions7 post 'burn-back'. An attempt was made to estimate the magnitude of an explosion that occurred during one of the releases. The resulting data were used to propose safety distances for LH2 offloading facilities which will help to update and develop guidance for codes and standards.Crown

Available online xxxKeywords: Hydrogen High-pressure FLACS Thermal radiation Coanda Flammable extent a b s t r a c t This paper describes experimental and numerical modelling results from an investigation into the flammability profiles associated with high pressure hydrogen jets released in close proximity to surfaces. This work was performed under a Transnational Access Agreement activity funded by the European Research Infrastructure project, H2FC. The experimental programme involved ignited and unignited releases of hydrogen at pressures of 150 and 425 barg through nozzles of 1.06 and 0.64 mm respectively. The proximity of the release to a ceiling or the ground was varied and the results compared with an equivalent free-jet test. During the unignited experiments concentration profiles were measured using hydrogen sensors. During the ignited releases thermal radiation was measured using radiometers and an infra-red camera. The results show that the flammable volume and flame length increase when the release is in close proximity to a surface. The increases are quantified and the safety implications discussed. Selected experiments were modelled using the CFD model FLACS for validation purposes and a comparison of the results is also included in this paper. Similarly to experiments, the CFD results show an increase in flammable volume when the release is close to a surface. The unstable atmospheric conditions during the experiments are shown to have a significant impact on the results. Crown

No abstract

No abstract

No abstract