No abstract

No abstract

No abstract

No abstract

Microstructural characterisation of nickel rich areas and their influence on endurance limit of sintered steel Bernier, F.; Plamondon, P.; Baïlon, J.-P.; L'Espérance, G. Nickel is an often used alloying element in powder metal steel to achieve high hardenability. However, when nickel is added, the slow diffusion rate between iron and nickel leads to the formation of nickel rich areas (NRAs). Two steel alloys were studied: a Fe-6?4Ni-0?7Mo-0?7C with standard sized nickel powder additions and a Fe-2?4Ni-0?7Mo-0?7C with a finer sized nickel powder. Microstructural characterisation of the parts revealed that sufficient hardenability was achieved for both materials, but that NRAs were observed when standard sized nickel is used. Xray energy dispersive spectrometry and electron diffraction show that the NRAs are composed of martensite and austenite under rapid cooling conditions. Three-point bending fatigue tests were carried out on both alloys to evaluate the effect of these soft austenitic areas on the fatigue properties of powder metal steel parts. The analysis of the endurance limit results shows that NRAs are not a governing factor.