No abstract

A key pharmaceutical intermediate (1) for production of edivoxetine•HCl was prepared in >99% ee via a continuous Barbier reaction, which improves the greenness of the process relative to a traditional Grignard batch process. The Barbier flow process was run optimally by Eli Lilly and Company in a series of continuous stirred tank reactors (CSTR) where residence times, solvent composition, stoichiometry, and operations temperature were optimized to produce 12 g h −1 crude ketone 6 with 98% ee and 88% in situ yield for 47 hours total flow time. Continuous salt formation and isolation of intermediate 1 from the ketone solution was demonstrated at 89% yield, >99% purity, and 22 g h −1 production rates using MSMPRs in series for 18 hours total flow time. Key benefits to this continuous approach include greater than 30% reduced process mass intensity and magnesium usage relative to a traditional batch process. In addition, the flow process imparts significant process safety benefits for Barbier/Grignard processes including >100× less excess magnesium to quench, >100× less diisobutylaluminum hydride to initiate, and in this system, maximum long-term scale is expected to be 50 L which replaces 4000-6000 L batch reactors.

No abstract

A flow Barbier process was developed to produce a key intermediate in the edivoxetine·HCl registered sequence. The control strategy was developed based on a critical understanding of integrated parameters and design space requirements for a continuous stirred tank reactor (CSTR) process. In this flow Barbier process, the Grignard reagent formation and reaction occurs in a single CSTR, with quenching of the resulting tetrahedral intermediate in a second CSTR. Real time Process Analytical Technology (PAT) monitoring was used to assist process development and understanding. The postquench liquid–liquid separation was continuous, and the quenched intermediate flowed directly into a neutralization CSTR to minimize the epimerization potential of the quenched intermediate. The optimized process was run for 80 consecutive hours in 2 L CSTRs where magnesium was recharged every 4 h for the first half of the continuous campaign and every 8 h for the second half with no quantifiable differences in performance. The Barbier process delivered in situ >99% ee which is sufficient for telescoping into the next step. The process development is intended to support a Quality by Design (Qbd) regulatory submission.

Efficient continuous Grignard and lithiation processes were developed to produce one of the key regulatory starting materials for the production of edivoxetine hydrochoride. For the Grignard process, organometallic reagent formation, Bouveault formylation, reduction, and workup steps were run in continuous stirred tank reactors (CSTRs). The lithiation utilized a hybrid approach where plug flow reactors (PFRs) were used for the metal halogen exchange and Bouveault formylation steps, while the reduction and workup steps were performed in CSTRs. Relative to traditional batch processing, both approaches offer significant advantages. Both processes were high-yielding and produced the product in high purity. The two main processes were directly compared from a number of perspectives including reagent and operational safety, fouling potential, process footprint, need for manual operation, and product yield and purity.