For the first time, we report femtosecond pulses from a passive single-section InAs/InP quantum-dot (QD) mode-locked laser (MLL) with the active length of 456 microm and ridge width of 2.5 microm at the C-band wavelength range. Without any external pulse compression, the transform-limited Gaussian-pulses are generated at the 92 GHz repetition rate with the 312 fs pulse duration, which is the shortest pulse from any directly electric-pumping semiconductor MLLs to our best knowledge. The lasing threshold injection current and external differential quantum efficiency are 17.2 mA and 38%, respectively. We have also investigated the working principles of the proposed QD MLLs.

We have developed an InAs/InP quantum dot (QD) C-band coherent comb laser (CCL) module with actively stabilized absolute wavelength and power, and channel spacing of 34.462 GHz with ± 100 ppm accuracy. The total output power is up to 46 mW. The integrated average relative intensity noise (RIN) values of the lasing spectrum and a filtered single channel at 1540.19 nm were -165.6 dB/Hz and -130.3 dB/Hz respectively in the frequency range from 10 MHz to 10 GHz. The optical linewidth of the 45 filtered individual channels between 1531.77 nm to 1543.77 nm ranged from 850 kHz to 2.16 MHz. We have also analyzed the noise behaviors of each individual channel.

We have used an external cavity self-injection feedback locking (SIFL) system to simultaneously reduce the optical linewidth of over 39 individual wavelength channels of an InAs/InP quantum dot (QD) coherent comb laser (CCL). Linewidth reduction from a few MHz to less than 200 kHz is observed. Measured phase noise spectra clearly indicate a significant decrease in phase noise in the frequency range above 2 kHz. The RF beating signal between two adjacent channels also shows a substantial reduction in 3-dB linewidth from 10 kHz to 300 Hz with the SIFL system, and a corresponding drop in baseline level (-27 dB to -50 dB).

As the internal combustion engine moves into the 21st century, fully flexible valve actuation systems are being proposed as an enabling technology for advanced internal combustion engine concepts. Electro-hydraulic valve actuator systems are being considered as a potential variable valve technology. Compared to the servo control system, the system using a proportional valve has the advantages of low price, high anti-pollution ability and high reliability. Our research focuses on exploring the dynamic characteristic of the electro-hydraulic variable valve system, which is based on three-way proportional reducing valve. In this paper, the structure and working principles of the system are described. The dynamic mathematical model of the system is derived. From the analysis of a linearized model and dynamic simulation, it is demonstrated that the system will be stable only if the proportional reducing valve has a positive opening. Some structural factors that affect the system's dynamic characteristics, such as input signal, the stiffness of the return spring and the pre-tightening force of the return spring, are studied using AMESim. The experimental results coincide with the theoretical and simulated analyses. Further study shows that the dynamic response can be improved effectively by adopting closed-loop control of valve lift.

We report on a study of terahertz (THz) generation using implanted InGaAs photomixers and multi-wavelength quantum dot lasers. We carry out InGaAs materials growth, optical characterization, device design and fabrication, and photomixing experiments. This approach is capable of generating a comb of electromagnetic radiation from microwave to terahertz. For shortening photomixer carrier lifetime, we employ proton implantation into an epitaxial layer of lattice matched InGaAs grown on InP. Under a 1.55 μm multi-mode InGaAs/InGaAsP quantum dot laser excitation, a frequency comb with a constant frequency spacing of 50 GHz generated on the photomixer is measured, which corresponds to the beats of the laser longitudinal modes. The measurement is performed with a Fourier transform infrared spectrometer. This approach affords a convenient method to achieve a broadband multi-peak coherent THz source.