Radiation detectors based on Cadmium Zinc Telluride (CZT) compounds are becoming popular solutions thanks to their high detection efficiency, room temperature operation, and to their reliability in compact detection systems for medical, astrophysical, or industrial applications. However, despite a huge effort to improve the technological process, CZT detectors’ full potential has not been completely exploited when both high spatial and energy resolution are required by the application, especially at low energies (<10 keV), limiting their application in energy-resolved photon counting (ERPC) systems. This gap can also be attributed to the lack of dedicated front-end electronics which can bring out the best in terms of detector spectroscopic performances. In this work, we present the latest results achieved in terms of energy resolution using SIRIO, a fast low-noise charge sensitive amplifier, and a linear-array pixel detector, based on boron oxide encapsulated vertical Bridgman-grown B-VB CZT crystals. The detector features a 0.25-mm pitch, a 1-mm thickness and is operated at a −700-V bias voltage. An equivalent noise charge of 39.2 el. r.m.s. (corresponding to 412 eV FWHM) was measured on the test pulser at 32 ns peaking time, leading to a raw resolution of 1.3% (782 eV FWHM) on the 59 keV line at room temperature (+20 °C) using an uncollimated 241Am, largely improving the current state of the art for CZT-based detection systems at such short peaking times, and achieving an optimum resolution of 0.97% (576 eV FWHM) at 1 µs peaking time. The measured energy resolution at the 122 keV line and with 1 µs peaking time of a 57Co raw uncollimated spectrum is 0.96% (1.17 keV). These activities are in the framework of an Italian collaboration on the development of energy-resolved X-ray scanners for material recycling, medical applications, and non-destructive testing in the food industry.

No abstract

X-ray imagers with spectroscopic capabilities and high photon count rates are finding promising applications in industrial real-time inspection systems. In this context, XSpectra® combines a CdTe-based linear energy-resolved photon counting (ERPC) pixel sensor with real-time image processing techniques to detect low and high density contaminants. The detection unit makes use of a new analog read-out ASIC that has been designed by Politecnico di Milano to meet strict application requirements both in energy resolution and achievable photon count rate. A room-temperature low-rate spectroscopic characterization of the system at a peaking time of 60 ns showed an average equivalent noise charge of 259 electrons r.m.s. (2.72 keV FWHM in CdTe) and an average FWHM of the 59.5 keV 241Am line of 3.6 keV, with a 3σ dispersion in noise performance of ±10% over 256 channels. The detection unit was tested in high incoming photon flux conditions by means of an X-ray tube. Minimal spectral distortion due to pile-up events is obtained up to an Incoming Count Rate of 2.5 Mcps/channel, while the maximum counting capability of energy-resolved events is 2.2 Mcps/channel.