Gas nanosensors, comprised of arrays of nanoelectrodes with finger-widths of ∼100 nm developed by electron beam lithography and aerosol assisted chemical vapor deposited non-functionalized and Pt-functionalized tungsten oxide nanowires (<100 nm) subsequently integrated across the pairs of electrodes via the dielectrophoresis method, are developed in this work. The functionality of these devices is validated towards various concentrations of NO2 and C2H5OH. The results demonstrate reproducible and consistent responses with better sensitivity and partial selectivity for the non-functionalized systems to NO2, as opposed to the Pt-functionalized systems, which display better sensing properties towards C2H5OH with a loss of response to NO2. These results are explained on the basis of the additional chemical and electronic interactions at the Pt/tungsten oxide interface, which increase the pre-adsorption of oxygen species and make the functionalized surface rather more sensitive to C2H5OH than to NO2, in contrast to the non-functionalized surface.

No abstract

No abstract

Abstract:Here we present the gas sensing characterization of single-nanowire sensor array systems based on either non-functionalized or Pt-functionalized single tungsten oxide nanowires towards various concentrations of nitrogen dioxide and ethanol. The sensor systems demonstrate stable and reproducible responses to the tested analytes, showing consistency with previous systems based on multiple-nanowire based films and validating the fabrication process of these devices.